This fixes a deadlock VLC triggered with multithreaded decoding. The
wait forces one of the current waiters to wake and not the thread
which calls pthread_cond_signal() itself.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
lavc: always align height by 32 pixel
raw: add 10bit YUV definitions
nut: support 10bit YUV
mpegvideo_enc: separate declarations and statements
oma: make header compile standalone
vp3: Reorder some functions to fix VP3 build with Theora disabled.
build: fix standalone compilation of ADX encoder
build: fix standalone compilation of ADPCM decoders
build: fix standalone compilation of mpc7/mpc8 decoders
4xm: Use bytestream2 functions to prevent overreads
bytestream: add a new set of bytestream functions with overread checking
mpegts: Suppress invalid timebase warnings on DMB streams.
mpegts: Fix typo in handling sections in the PMT.
vc1dec: Use the right pointer type for the tmp pointer
Conflicts:
libavcodec/4xm.c
libavcodec/utils.c
libavcodec/vc1dec.c
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Interlaced content for most codec requires it.
This patch is a stop-gap pending a serious rework to support
codecs with non 16 pixel macroblocks.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
h264: clear trailing bits in partially parsed NAL units
vc1: Handle WVC1 interlaced stream
xl: Fix overreads
mpegts: rename payload_index to payload_size
segment: introduce segmented chain muxer
lavu: add AVERROR_BUG error value
avplay: clear pkt_temp when pkt is freed.
qcelpdec: K&R formatting cosmetics
qcelpdec: cosmetics: drop some pointless parentheses
x86: conditionally compile dnxhd encoder optimizations
Revert "h264: skip start code search if the size of the nal unit is known"
swscale: fix formatting and indentation of unscaled conversion routines.
h264: skip start code search if the size of the nal unit is known
cljr: fix buf_size sanity check
cljr: Check if width and height are positive integers
Conflicts:
libavcodec/cljr.c
libavcodec/vc1dec.c
libavformat/Makefile
libavformat/mpegtsenc.c
libavformat/segment.c
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Trailing bits are likely to be non-zero if the NAL unit is truncated.
Clearing the bits make overreads of the bitstream less likely in this
case. Fixes playback of
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4 which
has a forbidden byte sequence of 0x00 0x00 0x00 in it SPS.
* qatar/master:
APIchanges: fill in revision for AVFrame.age deprecation
avcodec: deprecate AVFrame.age
4xm: remove unneeded check for remaining unused data.
lavf: force threads to 1 in avformat_find_stream_info()
swscale: fix overflows in vertical scaling at top/bottom edges.
lavf: add OpenMG audio muxer.
omadec: split data that will be used in the muxer to a separate file.
lavf: rename oma.c -> omadec.c
tmv decoder: set correct pix_fmt
Conflicts:
Changelog
doc/APIchanges
libavcodec/mpegvideo.c
libavcodec/version.h
libavformat/oma.c
libavformat/version.h
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Start code emulation prevention is only required in Annex B bytestream
packed NAL units. For other coding formats the size is already known.
Looking for a start code prefix can result in false positives like in
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4
which has a false positive in the SPS.
Width and height might get passed as 0 and would cause floating point
exceptions in decode_frame.
Fixes bugzilla #149
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This was intended as an optimisation for skipped blocks in MPEG2
P-frames and never used elsewhere. Removing this "optimisation"
speeds up MPEG2 decoding by 1-2% (ARM Cortex-A9).
Signed-off-by: Mans Rullgard <mans@mansr.com>
The previous code ended in multiple different infinite
loops. See stl_ten_1_big.sfd as example with and without zzuf
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously the decoder only worked if the user had set avctx->pix_fmt
manually. For some reason the libavformat tmv demuxer sets this, so
the problem was not visible in avplay etc.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
that way qatar maintains the code for me and i dont need to resolve conflicts.
If someone wants the a32 reader back, only thing you need to do is maintain
it, i would be happy to have it back, iam just not volunteering to maintain
it due to lack of time.
Based on: a1e98f198e by Mans Rullgard.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No difference in PSNR or bitrate in the printed precission with the matrix lobby scene at 322x242
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The buffer splicing relies on the bitstream reader over-reading
the end of the buffer as declared in init_get_bits(), although
more data is actually present. Manually moving the bitstream
boundary after init_get_bits() allows this to work as expected.
Signed-off-by: Mans Rullgard <mans@mansr.com>
When turned on, H264/CAVLC gets ~15% (CVPCMNL1_SVA_C.264) slower for
ultra-high-bitrate files, or ~2.5% (CVFI1_SVA_C.264) for lower-bitrate
files. Other codecs are affected to a lesser extent because they are
less optimized; e.g., VC-1 slows down by less than 1% (all on x86).
The patch generated 3 extra instructions (cmp, cmovae and mov) per
call to get_bits().
The performance penalty on ARM is within the error margin for most
files, up to 4% in extreme cases such as CVPCMNL1_SVA_C.264.
Based on work (for GCI) by Aneesh Dogra <lionaneesh@gmail.com>, and
inspired by patch in Chromium by Chris Evans <cevans@chromium.org>.
* qatar/master:
get_bits: remove A32 variant
avconv: support stream specifiers in -metadata and -map_metadata
wavpack: Fix 32-bit clipping
wavpack: Clip samples after shifting
h264: don't drop B-frames after next keyframe on POC reset.
get_bits: remove useless pointer casts
configure: refactor lists of tests and components into variables
rv40: NEON optimised weak loop filter
mpegts: replace some magic numbers with the existing define
swscale: add unscaled packed 16 bit per component endianess conversion
Conflicts:
libavcodec/get_bits.h
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The A32 bitstream reader variant is only used on ARMv5 and for
Prores due to the larger bit cache this decoder requires.
In benchmarks on ARMv5 (Marvell Sheeva) with gcc 4.6, the only
statistically significant difference between ALT and A32 is
a 4% advantage for ALT in FLAC decoding. There is thus no (longer)
any reason to keep the A32 reader from this point of view.
This patch adds an option to the ALT reader increasing the bit
cache to 32 bits as required by the Prores decoder. Benchmarking
shows no significant change in speed on Intel i7. Again, the
A32 reader fails to justify its existence.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In the case that (frame_flags & 0x03) == 3, hybrid_maxclip
may have had a signed integer overflow.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
It doesn't make much sense to clip pre-shift,
nor is it correct for proper decoding.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The keyframe after a POC reset may not be the first to be returned to
the user. Therefore, don't reset the expected next POC once we return
a keyframe to the user, but once we know that the next frame in the
return-queue is a keyframe.
width and height might get passed as 0 and would cause floating point
exceptions in decode_frame.
Fixes bugzilla #149
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
XBMC's configure script checks for this function in installed
libavcodec.so to determine VDPAU support.
Fixes ticket #762 reported by Christian Marillat
* qatar/master:
movenc: Rudimentary IODs support.
v410enc: fix output buffer size check
v410enc: include correct headers
fate: add -pix_fmt rgb48le to r210 test
flvenc: Support muxing 16 kHz nellymoser
configure: refactor list of programs into a variable
fate: add r210 decoder test
fate: split off Indeo FATE tests into their own file
fate: split off ATRAC FATE tests into their own file
fate: Add FATE tests for v410 encoder and decoder
ARM: fix external symbol refs in rv40 asm
westwood: Make sure audio header info is present when parsing audio packets
libgsm: Reset the MS mode of GSM in the flush function
libgsm: Set options on the right object
ARM: dca: disable optimised decode_blockcodes() for old gcc
Conflicts:
configure
libavformat/movenc.c
libavformat/movenc.h
tests/fate2.mak
tests/ref/acodec/alac
tests/ref/vsynth1/mpeg4
tests/ref/vsynth2/mpeg4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The mode is set in libgsm_decode_init, but the decoder
object is simply destroyed and recreated in the flush
function - therefore the mode has to be set again.
This fixes playback using the libgsm_ms decoder in avplay.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit 4f820131fa.
It is better to abort() than to have remotly exploitable arbitrary code
execution bugs. Even more so that this abort has never been triggered
by any input people threw at it.
If after more extensive testing its removial is found safe we can remove
the abort() later.
* qatar/master: (23 commits)
applehttp: Properly clean up if unable to probe a segment
applehttp: Avoid reading uninitialized memory
fate: Replace misleading "aac" in the name of an ADTS test with "adts".
fate: Drop pointless "-an" from pictor test command.
fate: split off image codec FATE tests into their own file
fate: split off WMA codec FATE tests into their own file
fate: split off lossless video and audio FATE tests into their own files
fate: split off qtrle codec FATE tests into their own file
fate: split off Ut Video codec FATE tests into their own file
fate: split off screen codec FATE tests into their own file
fate: split off Real Inc. codec FATE tests into their own file
fate: split off AC-3 codec FATE tests into their own file
mpegvideo: remove abort() in ff_find_unused_picture()
rv40: NEON optimised loop filter strength selection
rv40: rearrange loop filter functions
configure: cosmetics: sort some lists where appropriate
swscale_mmx: drop no longer required parameters from VSCALEX macros
swscale: Mark yuv2planeX_8_mmx as MMX2; it contains MMX2 instructions.
build: conditionally compile x86 H.264 chroma optimizations
v410 encoder and decoder
...
Conflicts:
Changelog
configure
doc/developer.texi
doc/general.texi
libavcodec/arm/asm.S
libavcodec/avcodec.h
libavcodec/v410dec.c
libavcodec/v410enc.c
libavcodec/version.h
libavcodec/x86/Makefile
libavcodec/x86/dsputil_mmx.c
libswscale/x86/swscale_mmx.c
tests/Makefile
tests/fate2.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
A user who wishes to use default error concealment cannot set the
AV_EF_CRCCHECK flag because not every CRC in every format is a
reliable indicator of bitstream damage. In some formats crcrs
can be nonsensical in absence of any damage. We thus add the
AV_EF_CAREFUL flag in addition to the AV_EF_CRCCHECK flag to
allow a user to enable this reliable CRC check without having to
enable all CRC checks in all formats.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
ulti: Fix invalid reads
lavf: dealloc private options in av_write_trailer
yadif: support 10bit YUV
vc1: mark with ER_MB_ERROR bits overconsumption
lavc: introduce ER_MB_END and ER_MB_ERROR
error_resilience: use the ER_ namespace
build: move inclusion of subdir.mak to main subdir loop
rv34: NEON optimised 4x4 dequant
rv34: move 4x4 dequant to RV34DSPContext
aacdec: Use intfloat.h rather than local punning union.
Conflicts:
libavcodec/h264.c
libavcodec/vc1dec.c
libavfilter/vf_yadif.c
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch is a generalization of what Michael Niedermayer
fixed in a single case.
The wmv8-drm fate test had been updated accordingly.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The change in 599b4c6ef didn't turn out to work properly on
i386 on OS X, where it broke building with PIC enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit f1dba9e498)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The change in 599b4c6ef didn't turn out to work properly on
i386 on OS X, where it broke building with PIC enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
x86: cabac: replace explicit memory references with "m" operands
avplay: don't request a stereo downmix
wmapro: use av_float2int()
lavc: avoid invalid memcpy() in avcodec_default_release_buffer()
lavu: replace int/float punning functions
lavfi: install libavfilter/vsrc_buffer.h
Remove extraneous semicolons
sdp: Restore the original mp4 format h264 extradata if converted
rtpenc: Add support for mp4 format h264
rtpenc: Simplify code by introducing a separate end pointer
movenc: Use the actual converted sample for RTP hinting
Fix a bunch of common typos.
Conflicts:
doc/developer.texi
doc/eval.texi
doc/filters.texi
doc/protocols.texi
ffmpeg.c
ffplay.c
libavcodec/mpegvideo.h
libavcodec/x86/cabac.h
libavfilter/Makefile
libavformat/avformat.h
libavformat/cafdec.c
libavformat/flvdec.c
libavformat/flvenc.c
libavformat/gxfenc.c
libavformat/img2.c
libavformat/movenc.c
libavformat/mpegts.c
libavformat/rtpenc_h264.c
libavformat/utils.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Make the function prototype match the argument of
AVCodecCntext.execute() and remove the cast hiding
this mismatch.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This replaces the explicit offset(reg) memory references with
"m" operands for the same locations. As a result, one fewer
register operand is needed for these inline asm statements.
Signed-off-by: Mans Rullgard <mans@mansr.com>
When the buf and last pointers are equal, the FFSWAP() results
in an invalid call to memcpy() with same source and destination
on some targets. Although assigning a struct to itself is valid
C99, gcc does not check for this before calling memcpy().
See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=32667
Signed-off-by: Mans Rullgard <mans@mansr.com>
The existing functions defined in intfloat_readwrite.[ch] are
both slow and incorrect (infinities are not handled).
This introduces a new header with fast, inline conversion
functions using direct union punning assuming an IEEE-754
system, an assumption already made throughout the code.
The one use of Intel/Motorola extended 80-bit format is
replaced by simpler code sufficient under the present
constraints (positive normal values).
The old functions are marked deprecated and retained for
compatibility.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (21 commits)
Warn about avserver being broken.
avconv: drop code for special handling of avserver streams.
rawdec: don't set codec timebase.
lavf doxy: add muxing stuff to lavf_encoding group
lavf doxy: add demuxing stuff to lavf_decoding group
lavf doxy: expand/reword metadata API doxy.
lavf doxy: add installed headers to groups.
lavf doxy: add avio groups into the lavf_io group.
lavf doxy: rename lavf I/O group to lavf_io.
lavf doxy: add metadata docs to the main lavf group
ttadec: check channel count as read from extradata.
Add CLJR encoding and decoding regression tests
cljr: remove unused code
flacdec: Support for tracks in cuesheet metadata block
ptx: fix inverted check for sufficient data
flac muxer: fix writing of file header and STREAMINFO header from extradata
ptx: emit a warning on insufficient picture data
utvideo: add fate tests covering all codec variants
doc: update to refer to avconv
doc: remove some stale entries from the faq
...
Conflicts:
Changelog
avconv.c
doc/avconv.texi
doc/faq.texi
doc/ffplay.texi
doc/ffprobe.texi
doc/ffserver.texi
libavcodec/avcodec.h
libavcodec/cljr.c
libavformat/avformat.h
libavformat/riff.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Return the whole packet as consumed in this case and not the size the
packet should have had. Move the insufficient data check into the for
condition to fix a ISO C90 error on bigendian.
* qatar/master:
cljr: K&R cosmetics
cljr: return a more sensible value when encountering invalid headers
cljr: drop unnecessary emms_c() calls without MMX code
cljr: remove useless casts
cljr: group encode/decode parts under single ifdefs
cljr: remove stray semicolon
cljr: add missing return statement in decode_end()
doc: add pulseaudio to the input list
avconv: remove unsubstantiated comment
shorten: avoid abort() on unknown audio types
cljr: add encoder
build: merge lists of HTML documentation targets
tests/examples: Mark some variables only used within their files as static.
tests/tools/examples: Replace direct exit() calls by return.
x86 cpuid: set vendor union members separately
cljr: release picture at end of decoding
rv40: NEON optimised rv40 qpel motion compensation
Conflicts:
doc/examples/muxing.c
libavcodec/cljr.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Thus we can check for 4 being available.
If the next block is skiped we need 4 bits to encode the skip. If the
next block is not skiped then we need 1 bit for the skip code and
at least 3 bits for the block.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This groups the encode/decode parts under single ifdefs and
eliminates the encode_init() function as it merely calls
common_init(). Also fix whitespace in moved code.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
drawtext: remove typo
pcm-mpeg: implement new audio decoding api
w32thread: port fixes to pthread_cond_broadcast() from x264.
doc: add editor configuration section with Vim and Emacs settings
dxva2.h: include d3d9.h to define LPDIRECT3DSURFACE9
avformat/utils: Drop unused goto label.
doxygen: Replace '\' by '@' in Doxygen markup tags.
cosmetics: drop some completely pointless parentheses
cljr: simplify CLJRContext
drawtext: introduce rand(min, max)
drawtext: introduce explicit draw/hide variable
rtmp: Use nb_invokes for all invoke commands
Conflicts:
libavcodec/mpegvideo.c
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In 1bpp mode, interpret skip&0x80 as "start a new line" instead of "go to next line", this is almost the same except for the first line which was always skipped before and caused to try to write an extra line at the end of the frame (ticket #226).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall:
Fix lms_update()
Move num_lms reading out of a loop
Use correct value for range
Fix some int / int16_t / int32_t confusion
Implement revert_mclms() and associated functions
Fix two more int16_t vs. int confusion
Init s->cdlms[][].recent to order - 1
Add a size argument to dump_int_buffer()
Get rid of logging that are not required anymore
Fix some int vs. int16_t confusion
Conflicts:
libavcodec/wmalosslessdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mov: Don't av_malloc(0).
avconv: only allocate 1 AVFrame per input stream
avconv: fix memleaks due to not freeing the AVFrame for audio
h264-fate: remove -strict 1 except where necessary (mr4/5-tandberg).
misc Doxygen markup improvements
doxygen: eliminate Qt-style doxygen syntax
g722: Add a regression test for muxing/demuxing in wav
g722: Change bits per sample to 4
g722dec: Signal skipping the lower bits via AVOptions instead of bits_per_coded_sample
api-example: update to use avcodec_decode_audio4()
avplay: use avcodec_decode_audio4()
avplay: use a separate buffer for playing silence
avformat: use avcodec_decode_audio4() in avformat_find_stream_info()
avconv: use avcodec_decode_audio4() instead of avcodec_decode_audio3()
mov: Allow empty stts atom.
doc: document preferred Doxygen syntax and make patcheck detect it
Conflicts:
avconv.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/version.h
libavformat/mov.c
tests/codec-regression.sh
tests/fate/h264.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Earlier, bits per sample was defined as 8, since
bits_per_coded_sample was used to indicate whether to ignore
the lower bits of the codeword, having values 6, 7 or 8.
g722 encodes 2 samples into one byte codeword, therefore the
bits per sample is 4. By changing this, the generated timestamps
for streams encoded with g722 become correct.
This makes timestamp generation for g722 data correct (both when
encoding and when demuxing from raw g722 files).
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids using bits_per_coded_sample for this information.
bits_per_coded_sample should be 4 for this codec normally,
since two samples are encoded into one 8 bit codeword.
In principle, this might be info that needs to be passed from
a demuxer, and in that case, a private AVOption isn't the best
choice, but no such samples are available at the moment, so
that use case is purely theoretical at the moment.
Signed-off-by: Martin Storsjö <martin@martin.st>
