A few fate instances on OS/2, OpenBSD, FreeBSD and IA64 linux currently
still fail a few tests with a maxdiff of 6.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '68edd5be0980941924ae633d98589d56a8091bbd':
FATE: use proper comparison mode in the lavr tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The tests are disabled as 2 do not pass yet
(fate-hevc-conformance-PPS_A_qualcomm_7 and fate-hevc-conformance-RAP_A_docomo_4)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '364af376f343d4706c4cdb7ab9fe0863994e6c01':
FATE: add lavr resampling tests
The tests do not pass, and thus where disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ab5f7107d2f1411e9fda6c36af64524e5ed31d1':
FATE: add lavr mixing tests
The tests do not pass, and thus where disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Here is an extract of fate-samples/sub/vobsub.idx, with an additional
text at the end of each line to better identify each bitmap:
timestamp: 00:04:55:445, filepos: 00001b000 Ace!
timestamp: 00:05:00:049, filepos: 00001b800 Wake up, honey!
timestamp: 00:05:02:018, filepos: 00001c800 I gotta go to work.
timestamp: 00:05:02:035, filepos: 00001d000 <???>
timestamp: 00:05:04:203, filepos: 00001d800 Look after Clayton, okay?
timestamp: 00:05:05:947, filepos: 00001e800 I'll be back tonight.
timestamp: 00:05:07:957, filepos: 00001f800 Bye! Love you.
timestamp: 00:05:21:295, filepos: 000020800 Hey, Ace! What's up?
timestamp: 00:05:23:356, filepos: 000021800 Hey, how's it going?
timestamp: 00:05:24:640, filepos: 000022800 Remember what today is? The 3rd!
timestamp: 00:05:27:193, filepos: 000023800 Look over there!
timestamp: 00:05:28:369, filepos: 000024800 Where are they going?
timestamp: 00:05:28:361, filepos: 000025000 <???>
timestamp: 00:05:29:946, filepos: 000025800 Let's go see.
timestamp: 00:05:31:230, filepos: 000026000 I can't, man. I got Clayton.
Note the two "<???>": they are basically split subtitles (with the
previous one), which the dvdsub decoder is now supposed to reconstruct
with a previous commit. But also note that while the first chunk has
increasing timestamps,
timestamp: 00:05:02:018, filepos: 00001c800
timestamp: 00:05:02:035, filepos: 00001d000
...it's not the case of the second one (and this is not an exception in the
original file):
timestamp: 00:05:28:369, filepos: 000024800
timestamp: 00:05:28:361, filepos: 000025000
For the dvdsub decoder, they need to be "filepos'ed" ordered, but the
FFDemuxSubtitlesQueue is timestamps ordered, which is the reason of the
introduction of a sub sort method in the context, to allow giving
priority to the position, and then the timestamps. With that change, the
dvdsub decoder get fed with ordered packets.
Now the packet size estimation was also broken: the filepos differences
in the vobsub index defines the full data read between two subtitles
chunks, and it is necessary to take into account what is read by the
mpegps_read_pes_header() function since the length returned by that
function doesn't count the size of the data it reads. This is fixed with
the introduction of total_read, and {old,new}_pos. By doing this change,
we can drop the unreliable len16 heuristic and simplify the whole loop.
Note that mpegps_read_pes_header() often read more than one PES packet
(typically in one call it can read 0x1ba and 0x1be chunk along with the
relevant 0x1bd packet), which triggers the "total_read + pkt_size >
psize" check. This is an expected behaviour, which could be avoided by
having a more chunked version of mpegps_read_pes_header().
The latest change is the extraction of each stream into its own
subtitles queue. If we don't do this, the maximum size for a subtitle
chunk is broken, and the previous changes can not work. Having each
stream in a different queue requires some little adjustments in the
seek code of the demuxer.
This commit is only meaningful as a whole change and can not be easily
split. The FATE test changes because it uses the vobsub demuxer.
Fixes sync in some samples (e.g. bugs 7581 and 8374 in VLC).
Based on a commit by Matthieu Bouron <matthieu.bouron@gmail.com>
Reported-by: Jean-Baptiste Kempf <jb@videolan.org>
CC: libav-stable@libav.org
This may improve compatibility of lgpegs generated by libavcodec
also encoded ljpegs become slightly smaller
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f1eac2b8a0370b908cd691086d11f51342054730':
movenc: Use keyframes as default fragmentation point in ismv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For codecs where decoding of a whole plane can simply
be skipped, we should offer applications to not decode
alpha for better performance (ca. 30% less CPU usage
and 40% reduced memory bandwidth).
It also means applications do not need to implement support
(even if it is rather simple) for YUVA formats in order to be
able to play these files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Use it only on subtitle CuePoints.
With proper demuxer/splitter support this should improve the display
of subtitles right after seeking to a given point in the stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Files won't validate with mkvalidtor if these two elements are missing.
Use a const "Lavf" string that wont change with library version bumps.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The muxer has been creating files with v4 elements for some time now,
and especially now that we can mux non-experimental Opus files, reporting
the DocTypeVersion as 2 is not correct.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On openbsd the exif-image-jpg test fails but diff treats the files as
binary due to some non ascii symbols in them. This should force it to
treat them as text, which should result in more informative output
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The fate tests change as they used 1.2 previously
The increased size is due to:
32bit CRCs per slice by default (can be disabled),
it adds slice headers to allow decoding one slice without the others
an additional slice size field is added to make it possible to find
slices within corrupted surroundings.
these add up to about 57bit per slice more
at 50 frames and 4 slices thats 1425 byte
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Update the fate reference since the last broken frame is not decoded
anymore.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The bug it was working seems to have been fixed.
This change causes ffmpeg to use the trim filter to implement
the -t option.
FATE tests are updated due to the more accurate handling of
the last packets.
Iterative implementation of 32 bit fixed point split-radix FFT.
Max FFT that can be calculated currently is 2^12.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
for the n0=0 case there are multiple solutions and different
platforms pick different ones
This should reduce the issues with fate and the timefilter test
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '711c4da1af71e0d26ca93626a3c2dd48821f1cc7':
fate: Add tree test
Conflicts:
tests/fate/libavutil.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The option is used to sort the streams by program.
Signed-off-by: Florent Tribouilloy <florent.tribouilloy@smartjog.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Only check dependencies if invoking the make targets 'check'
or anything matching 'fate%' except 'fate-rsync'.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a minimal change to matroskaenc that implements CueRelativePosition in the output.
Most players will probably ignore this additional information, but it is in the
matroska spec, and it'd be nice to be able to make use of it.
Signed-off-by: Bernt Habermeier <bernt@wulfram.com>
Tested-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tags must have at least one SimpleTag element to be spec conformant.
Updated lavf-mkv and seek-lavf-mkv FATE references as the tests were affected by
this.
Fixes ticket #2785
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes speex in rtmp
Fixes Ticket2409
the nellymoser in flv case actually needs larger analyzeduration. The code
previously just failed to calculate the duration
If this causes any problems, like premature analyze/probe end, please report!
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6516632967da5e6bd7d6136e8678f826669ed26e':
tests: Only run noproxy test if networking is enabled
fifo: K&R formatting cosmetics
Conflicts:
libavformat/Makefile
libavutil/fifo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When operating on subsampled chroma planes, some rounding is taking
place. The left and top borders are rounded down while the width and
height are rounded up, so all rounding is done outward to guarantee the
logo area is fully covered.
The problem is that the width and height are counted from the
unrounded left and top borders, respectively. So if the left or top
border position has indeed been rounded down, and the width or height
needs no rounding (up), the position of the the right or bottom border
will be effectively rounded down, i.e. inward.
The issue can easily be seen with a yuv240p input and
-vf delogo=45:45:60:40:show=1 -vframes 1 delogo-bug.png
(or virtually any logo area with odd x and y and even width and
height.) The right and bottom chroma borders (in green) are clearly
off.
In order to fix this, the width and height must be adjusted to include
the bits lost in the rounding of the left and top border positions,
respectively, prior to being themselves rounded up.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The original delogo algorithm interpolates both horizontally and
vertically and uses the average to compute the resulting sample. This
works reasonably well when the logo area is almost square. However
when the logo area is significantly larger than high or higher than
large, the result is largely suboptimal.
The issue can be clearly seen by testing the delogo filter with a fake
logo area that is 200 pixels large and 2 pixels high. Vertical
interpolation gives a very good result in that case, horizontal
interpolation gives a very bad result, and the overall result is poor,
because both are given the same weight.
Even when the logo is roughly square, the current algorithm gives poor
results on the borders of the logo area, because it always gives
horizontal and vertical interpolations an equal weight, and this is
suboptimal on borders. For example, in the middle of the left hand
side border of the logo, you want to trust the left known point much
more than the right known point (which the current algorithm already
does) but also much more than the top and bottom known points (which
the current algorithm doesn't do.)
By properly weighting each known point when computing the value of
each interpolated pixel, the visual result is much better, especially
on borders and/or for high or large logo areas.
The algorithm I implemented guarantees that the weight of each of the
4 known points directly depends on its distance to the interpolated
point. It is largely inspired from the original algorithm, the key
difference being that it computes the relative weights globally
instead of separating the vertical and horizontal interpolations and
combining them afterward.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tha fate tests change because the edge mirroring was wrong before this commit
Reviewed-by: Nicolas BERTRAND <nicoinattendu@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adding an arbitrary amount of padding bytes at the end of the
ID3 metadata fixes cover art display for some software (iTunes,
Traktor, Serato, Torq).
For reference (ID3 metadata):
[ Apic frames ] -> cover doesn't show up
[ Apic frames, Padding ] -> ok
[ Apic frames, ID3 frames ] -> ok
[ ID3 frames, Apic frames ] -> cover doesn't show up
[ ID3 frames, Apic frames, Padding ] -> ok
* qatar/master:
doc: Mention the target_samples and ld variables for fate configs
fate.sh: Allow specifying --as via a specific variable
Conflicts:
doc/fate.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d2d6a4883479403798f4ed46941d5b365823570':
lavf: add a raw WavPack muxer.
apetag: add support for writing APE tags
matroskaenc: support muxing WavPack
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/apetag.h
libavformat/version.h
libavformat/wvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4a27a52a1f74016095b7aee1b4a422cf62217ade':
fate: Don't use files from SRC_PATH in the actual tests
indeo4: reuse context block VLC for band instead of defaulting
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The quantization code needs more work, not so much work
merging but more work investigating what is correct.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If building out of tree, make sure the filter scripts are copied
into the build tree before running tests. This makes sure that
SRC_PATH doesn't need to exist on the remote system (or doesn't
need to exist at the same path).
Signed-off-by: Martin Storsjö <martin@martin.st>
This more evenly distributes the load between threads
This also fixes the chroma filtering where the filter was applied twice
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array writes
No FFmpeg release is affected by this
This also fixes some artifacts
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the "build_only" variable is set in the configuration file, the
FATE client will skip running tests and just compile all targets.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8e673efc6f5b7a095557664660305148f2788d30':
prores: update FATE test to account for alpha plane present in the test sample
configure: Add basic valgrind-massif support
Conflicts:
tests/fate/prores.mak
tests/ref/fate/prores-alpha
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by ffmpeg state
that they are 'piff' compatible via 'ftyp' box, this needs to be corrected.
[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup.
This should also fix I/BI field pictures.
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs.
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e0c53c3408181d2e7d544eb65fc7355a79438dfe':
nut: use meaningful error values
FATE: use a less ambiguous end time for filter-trim-time test
Conflicts:
libavformat/nutdec.c
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is the first 2 MB of the official test7.mkv.
That length seems to be enough to detect the bugs
we had in our code so far.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit '768e44d044bc32de1e58c198a3708d186af7e966':
build: tune down the output of lcov/gcov
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b333f3a22a4db4cf65d6a0457ac82ecbe7c7ac44':
lavf-regression: use -frames instead of -t for image tests
Conflicts:
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
${1} is now the filter args and is inappropriate as a unique name for
the test (and causes some FATE issues because of the ':' in them).
${filter} is not used either to replace the ${1} because ${outfile}
already contains a unique name for the test.
* commit 'e036bb7899d0faca9159206be9bf5552e76e7633':
lavc: clear AVBuffers on decoded frames if refcounted_frames is not set
FATE: add an additional indeo3 test
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes -t sample-accurate for audio and will allow further
simplication in the future.
Most of the FATE changes are due to audio now being sample accurate. In
some cases a video frame was incorrectly passed with the old code, while
its was over the limit.
* qatar/master:
x86: ac3dsp: Remove 3dnow version of ff_ac3_extract_exponents
Conflicts:
tests/fate/ac3.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The function requires increasing the fuzz factor for the ac3/eac3 encode
tests and even so makes fate fail. It only provides a slight encoding
speedup for legacy CPUs that do not support SS2. Thus its benefit is not
worth the trouble it creates and fixing it would be a waste of time.
Most formats do not support negative timestamps, shift them to avoid
unexpected behaviour and a number of bad crashes.
CC:libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The sample is already included in the FATE suite, but is not tested
because cropping wasn't fully supported before.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
avcodec: Bump minor for JPEG 2000 decoder
JPEG 2000 decoder for DCinema
The mqc code is merged, the rest is added independent of
the existing jpeg2000 decoder and encoder.
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/mqc.c
libavcodec/mqc.h
libavcodec/mqcdec.c
libavcodec/version.h
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* commit '9bfc6e02bae9de354fb9ba09a8a140e83eeadf7d':
afifo: fix request_samples on the last frame in certain cases
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The current code can fail to return the last frame if it contains
exactly the requested number of samples.
Fixes the join filter test, which previously did not include the last
408 samples in most cases.
CC:libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
fate: cosmetics: More sensible order for entries in video filter file
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a77aed142cade3beb0cd43f879d4f47daae23b8a':
fate: Rename video filters file and add separate video filters target
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b357f1d1d3dd1d6672df6a397a31be425d31b6d1':
fate: Split audio filters into their own separate file
Conflicts:
tests/Makefile
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
To define accurately the delay between two frames, it is necessary to
have both available. Before this commit, the first frame had a delay of
0; while in practice the problem is not visible in most situation, it is
problematic with low frame rate and large scene change.
This commit notably fixes output generated with commands such as:
ffmpeg -i big_buck_bunny_1080p_h264.mov
-vf "select='gt(scene,0.4)',scale=320:-1,setpts=N/TB"
-frames:v 5 -y out.gif
Also, to avoid odd loop delays, the N-1 delay is duplicated for the last
frame.
The encoder now doesn't produce any extra graphic control extension
block anymore. Only the image is encoded, and the muxer writing
its own GCE containing notably the timing information now includes the
optional palette transmitted through packet side data.
This commit avoid setting clashes between the two GCE, and reduce the
size of the generated file with pal8 output.
