Fixes ticket 9086.
Since early 2021, some of YouTube's VP9 encodes have non-monotonous DTS.
This makes ffmpeg fatally fail when trying to copy or encode the V9 video.
ffmpeg already includes functionality to correct this, however it was
disabled without explanation for VP9 stream copies in
2e6636aa87
This patch restores the DTS correction logic, and allows ffmpeg to correctly
encode (invalid) videos produced by youtube.com. I have verified that frames
are NOT being cut (so it does not re-introduce 4313).
Reviwed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
At present, side data printing forces display for all levels i.e.
stream, packets and frames. This can bloat output and also force
decode of all frames in selected streams.
Now, stream_side_data[=type], packet_side_data[=type] &
frame_side_data[=type] can be used with -show_entries to specify carrier
element.
fftools now print info about what media type(s), if any, are provided by
sink and source avdevices.
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
The transpose filter has modes equivalent to "rotation by 90°/270°"
followed by horizontal flips.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case of an orthogonal transformation av_display_rotation_get()
returns the (anticlockwise) degree that the unit vector in x-direction
gets rotated by; get_rotation in cmdutils.c makes a clockwise degree
out of this. So if one inserts a transpose filter corresponding to
this degree, then the x-vector gets mapped correctly and there are
two possibilities for image of the y-vector, namely the two unit
vectors orthogonal to the image of the x-vector.
E.g. if the x-vector gets rotated by 90° clockwise, then the two
possibilities for the y-vector are the unit vector in x direction
or its opposite. The latter case is a simple 90° rotation for both
vectors* whereas the former is a simple 90° clockwise rotation followed
by a horizontal flip. These two cases can be distinguished by looking
at the x-coordinate of the image of the y-vector, i.e. by looking
at displaymatrix[3]. Similarly for the case of a 270° clockwise
rotation.
These two cases were previously wrong (they were made to match
wrongly parsed exif rotation tag values).
*: For display matrices, the y-axis points downward.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If 'opts' could not be allocated, exiting the program to avoid crash when release it.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Yu Yang <yuyang14@kuaishou.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If the input stream framerate is known, it will be configured on the
relevant filtergraph input and get propagated to the output stream in
the above line. That makes these assignments redundant.
Do this by switching from the dynamic buffer API to the AVBPrint API;
the former has no defined way to check for errors.
This also avoids allocating an AVIOContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by switching from the dynamic buffer API to the AVBPrint API;
the former has no defined way to check for errors.
This also avoids allocating an AVIOContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The only caller of do_video_out() doesn't need the frame afterwards,
ergo one can replace an av_frame_ref() by av_frame_move_ref().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, adding a (separately allocated) element to a list of pointers
works by first reallocating the array of pointers and (on success)
incrementing its size and only then allocating the new element.
If the latter allocation fails, the size is inconsistent, i.e.
array[nb_array_elems - 1] is NULL. Our cleanup code crashes in such
scenarios.
Fix this by adding an auxiliary function that atomically allocates
and adds a new element to a list of pointers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
choose_pix_fmts() used the dynamic buffer API to write strings;
as is common among uses of this API, only opening the dynamic buffer
was checked, but not the end result, leading to crashes in case
of allocation failure.
Furthermore, some static strings were duplicated; the allocations
performed here were not properly checked: Allocation failure would
be treated as "could not determine pixel format".
The first issue is fixed by switching to the AVBPrint API which allows
to easily perform checks at the end. Furthermore, the internal buffer
avoids almost all allocations in case the AVBPrint is used.
The AVBPrint also allows to solve the second issue in an elegant way,
because it allows to return the static strings directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is not really natural, it requires internal allocations
of its own and its error handling is horrible (i.e. the implicit
(re)allocations here are unchecked).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Don't mark all streams as finished, instead make sync_opts keep track of the
stream's duration, and set recording_time to it, same as in transcoding paths.
Fixes tickets #9512 and #9513.
Signed-off-by: James Almer <jamrial@gmail.com>
This was almost completely redundant. The only functionality that's no longer
available after this removal is the videotoolbox_pixfmt arg, which has been
obsolete for several years.
The types used by the AVFifo API are inconsistent:
av_fifo_(space|size)() returns an int; av_fifo_alloc() takes an
unsigned, other parts use size_t. This commit therefore ensures
that the size of the muxing_queue FIFO never exceeds INT_MAX.
While just at it, also make sure not to call av_fifo_size()
unnecessarily often.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
send_frame_to_filters() sends a frame to all the filters that
need said frame; for every filter except the last one this involves
creating a reference to the frame, because
av_buffersrc_add_frame_flags() by default takes ownership of
the supplied references. Yet said function has a flag which
changes its behaviour to create a reference itself.
This commit uses this flag and stops creating the references itself;
this allows to remove the spare AVFrame holding the temporary
references; it also avoids unreferencing said frame.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
As well as the custom get_buffer2() implementation which would become a
redundant wrapper for avcodec_default_get_buffer2() after this
Signed-off-by: James Almer <jamrial@gmail.com>
Treat values returned from av_dict_get() as const, since they are
internal to AVDictionary.
Signed-off-by: Chad Fraleigh <chadf@triularity.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, the code doing this is spread over several places and may
behave in unexpected ways. E.g. automatic 'default' marking is only done
for streams fed by complex filtergraphs. It is also applied in the order
in which the output streams are initialized, which is effectively
random.
Move processing the dispositions at the end of open_output_file(), when
we already have all the necessary information.
Apply the automatic default marking only if no explicit -disposition
options were supplied by the user, and apply it to the first stream of
each type (excluding attached pics) when there is more than one stream
of that type and no default markings were copied from the input streams.
Explicitly document the new behavior.
Changes the results of some tests, where the output file gets a default
disposition, while it previously did not.
When viewing logs, it's sometimes useful to be able to see whether
execution was ended via q command.
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Prevents desktop stutters caused by the change (specifically on KDE).
We're not a game, we don't actually need it disabled.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
avcodec_receive_packet() already unreferences the packet on its own.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The output stream's packet may not have been allocated
at that point. This happens when quitting in the following command line:
$ ./ffmpeg -lavfi abuffer=sample_fmt=u8:sample_rate=48000:channel_layout=stereo -f null -
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Unused since 6b35a83214 (the removal of
ffserver).
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The transpose, rotate, hflip, and vflip filters don't support them.
Fixes ticket #9432.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Unnecessary since 1f63665ca5, because
the value the option is set to coincides with the default value.
Found-by: Soft Works <softworkz@hotmail.com>
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When a device is derived from a source device, there are at least 2
devices, and usually the derived device is the expected device, so let's
pick the last device if user doesn't specify the filter device with
filter_hw_device option
After applying this patch, the command below can work:
$> ffmpeg -init_hw_device vaapi=va:/dev/dri/renderD128 -init_hw_device
qsv=hw@va -f lavfi -i yuvtestsrc -vf
format=nv12,hwupload=extra_hw_frames=64 -c:v h264_qsv -y out.h264
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit 628a73f8f3.
At the time of said commit there was talk of removing the audio bitrate
"ab" option to bring FFmpeg in line with what Libav has done in 2012 in
commit 041cd5a0c5. By having different
option flags for the "ab" and the ordinay bitrate "b" option is is
possible to have different default bitrates for audio and video. In
order to maintain this behaviour and not break user scripts the commit
to be reverted added code to ffmpeg.c that set the bitrate value to the
audio default for audio codecs, but only if AVCodec.defaults didn't
exist (as in this case the default would be codec-default and not
affected by the "ab" removal).
This had the downside of being an API violation, because
AVCodec.defaults is not a public field. Given that the "ab" option
and its audio-specific default value have never been removed,
said API violation can be simply fixed by reverting said commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This way the CLI accepts for "filter_threads" the same values as for the
libavcodec specific option "threads".
Fixes FATE with THREADS=auto which was broken in bdc1bdf3f5.
Signed-off-by: James Almer <jamrial@gmail.com>
These were intended to pass options to auto-inserted avresample
resampling filters. Yet FFmpeg uses swresample for this purpose
(with its own AVDictionary swr_opts similar to resample_opts).
Therefore said options were not forwarded any more since commit
911417f0b34e611bf084319c5b5a4e4e630da940; moreover since commit
420cedd497 avresample options are
not even recognized and ignored any more. Yet there are still
remnants of all of this. This commit gets rid of them.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This reverts commit b3a0548a98.
This breaks the usage of swscale options, scale_sws_opts should be
passed to auto-inserted scale-filters.
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
When both -filter_threads and -threads are specified, the latter takes
effect. Since -threads is an encoder option and -filter_threads is a
filter option, it makes sense for the -filter_threads to take
precedence.
Besides being nicer code this also has the advantage of not making
assumptions about the internal implementation: While it is documented
that the AVFilter.inputs and AVFilter.outputs arrays are terminated
by a zeroed sentinel, one is not allowed to infer that one can just
check avfilter_pad_get_name(padarray, i) to see whether one has reached
the sentinel:
It could be that the pointer to the string is contained
in a different structure than AVFilterPad that needs to be accessed
first: return pad->struct->string.
It could be that for small strings an internal buffer in
AVFilterPad is used (to avoid a relocation) whereas for longer strings
an external string is used; this is useful to avoid relocations:
return pad->string_ptr ? pad->string_ptr : pad->interal_string
Or it could be that the name has a default value:
return pad->name ? pad->name : "default"
(This actually made sense for us because the name of most of our
AVFilterPads is just "default"; doing so would save lots of relocations.)
The only thing one is allowed to infer from the existence of the
sentinel is that one is allowed to use avfilter_pad_count() to get
the number of pads. Therefore it is used.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently user may use '-init_hw_device type=name' to initialize a hw
device, however the key parameter is ignored when use '-init_hw_device
type=name,key=value'. After applying this patch, user may set key
parameter if needed.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This allows user set hw_device_ctx instead of hw_frames_ctx for QSV
decoders, hence we may remove the ad-hoc libmfx setup code from FFmpeg.
"-hwaccel_output_format format" is applied to QSV decoders after
removing the ad-hoc libmfx code. In order to keep compatibility with old
commandlines, the default format is set to AV_PIX_FMT_QSV, but this
behavior will be removed in the future. Please set "-hwaccel_output_format qsv"
explicitly if AV_PIX_FMT_QSV is expected.
The normal device stuff works for QSV decoders now, user may use
"-init_hw_device args" to initialise device and "-hwaccel_device
devicename" to select a device for QSV decoders.
"-qsv_device device" which was added for workarounding device selection
in the ad-hoc libmfx code still works
For example:
$> ffmpeg -init_hw_device qsv=qsv:hw_any,child_device=/dev/dri/card0
-hwaccel qsv -c:v h264_qsv -i input.h264 -f null -
/dev/dri/renderD128 is actually open for h264_qsv decoder in the above
command without this patch. After applying this patch, /dev/dri/card0
is used.
$> ffmpeg -init_hw_device vaapi=va:/dev/dri/card0 -init_hw_device
qsv=hw@va -hwaccel_device hw -hwaccel qsv -c:v h264_qsv -i input.h264
-f null -
device hw of type qsv is not usable in the above command without this
patch. After applying this patch, this command works as expected.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
677a030b26 introduced more printable
side data types in ffprobe, however the Audio Service Type side data
'type' field that was introduced aliases an existing field of the same
name within the side data array, which can lead to JSON output like:
"side_data_list": [
{
"side_data_type": "Audio Service Type",
"type": 0
},
{
"side_data_type": "Stereo 3D",
"type": "side by side",
"inverted": 1
}
]
This, while technically valid JSON, is considered bad practice, since it
forces all downstream users to manually parse it and check all types;
it makes simple deserialization impossible. Worse, in som loosely
type languages, it can lead to silent bugs if exising code assumed
it was a different type.
As such, rename this second "type" field to "service_type".
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
11d3b03fcb added consideration of default stream disposition for audio
and video when choosing the 'best' stream among all the inputs. This can
lead to video streams with lower resolution or audio streams with fewer
channels being selected.
Stream disposition, however, only sets a priority for a stream
among all other streams in the *same input*. It cannot set a priority
for a stream across all inputs.
This patch sets a middle-way and selects the best stream from each file
with default disposition considered. Then it discards disposition weight
and selects best stream as per the original criteria of highest
resolution for video and most channels for audio.
