If not available, set flags to 24 (bits 4 and 5), to signal the wallclock value
is read at the time of writing the atom.
Signed-off-by: James Almer <jamrial@gmail.com>
Implemented as as a frag_duration muxer option and key=value entry in the
adaptation_sets muxer option. It has the same syntax as the seg_duration option.
A new frag_type option is also introduced to select the kind of fragmentation.
Signed-off-by: James Almer <jamrial@gmail.com>
Implemented as as a seg_duration key=value entry in the adaptation_sets muxer
option.
It has the same syntax as the global seg_duration option, and has precedence
over it if set.
Signed-off-by: James Almer <jamrial@gmail.com>
Since bae8844e35, the packet is automatically unreferenced in
ff_read_packet() when an error is returned; but the documentation of
this of AVInputFormat.read_packet has not been updated accordingly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The current code only checks when writing the trailer whether the video
format and Codec ID are actually compatible with the container. At this
point, a lot of data will already have been written (in vain, of
course), so check during the init function instead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Up until now, the Sega FILM muxer complained if the first stream wasn't a
video stream that there is no video stream at all which is of course
nonsense. So postpone this check.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
by changing the type to unsigned.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In order to indicate that the frames in a BlockGroup are not keyframes,
one has to add a ReferenceBlock element containing the timestamp of a
referenced Block that has already been written. The timestamp ought to be
relative to the timestamp of the Block it is attached to. Yet the
Matroska muxer used the relative timestamp of the preceding Block of the
track, i.e. the timestamp of the preceding block relative to the
timestamp of the Cluster containing said block (that need not be the
Cluster containing the current Block). This has been fixed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
libavformat/img2.h: New field export_path_metadata to
VideoDemuxData to only allow the use of the extra metadata
upon explicit user request, for security reasons.
libavformat/img2dec.c: Modify image2 demuxer to make available
two special metadata entries called lavf.image2dec.source_path
and lavf.image2dec.source_basename, which represents, respectively,
the complete path to the source image for the current frame and
the basename i.e. the file name related to the current frame.
These can then be used by filters like drawtext and others. The
metadata fields will only be available when explicitly enabled
with image2 option -export_path_metadata 1.
doc/demuxers.texi: Documented the new metadata fields available
for image2 and how to use them.
doc/filters.texi: Added an example on how to use the new metadata
fields with drawtext filter, in order to plot the input file path
to each output frame.
Usage example:
ffmpeg -f image2 -export_path_metadata 1 -pattern_type glob
-framerate 18 -i '/path/to/input/files/*.jpg'
-filter_complex drawtext="fontsize=40:fontcolor=white:
fontfile=FreeSans.ttf:borderw=2:bordercolor=black:
text='%{metadata\:lavf.image2dec.source_basename\:NA}':x=5:y=50"
output.avi
Fixes#2874.
Signed-off-by: Alexandre Heitor Schmidt <alexandre.schmidt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This will likely also fix CID 1452574 and 1452565, false positives
resulting from Coverity thinking that av_dict_set() automatically
frees its key and value parameters (even without the
AV_DICT_DONT_STRDUP_* flags).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Keep all the existing data fields as they are (there's lots and
lots of nontrivial calculation and heuristics based on them in
their current form), but derive the duration as the difference
between the pts of the first packet to the maximum pts+duration
(not necessarily the last packet); use this duration in any box
where the actual presentation duration is supposed to be.
Fixes: 8420
Signed-off-by: Martin Storsjö <martin@martin.st>
If the size of the input packet is zero, av_grow_packet() used to call
av_new_packet() which would initialize the packet and (in particular)
reset the pos field. This behaviour (which was never documented and
arguably always contradicted the documented behaviour) was changed in
2fe04630. This means that it is unnecessary to save and restore the
packet's position in append_packet_chunked().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes#8314.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: James Almer <jamrial@gmail.com>
The Dash muxer uses submuxers and when one such submuxer has been allocated,
it is initially only stored in a temporary variable. Therefore it leaks
if an error happens between the allocation and storing it permanently.
This commit changes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: "Jeyapal, Karthick" <kjeyapal@akamai.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit improves returned error codes by forwarding error codes. In
some instances, the hardcoded returned error codes made no sense at all:
The normal error code for failure of av_new_packet() is AVERROR(ENOMEM),
yet there were instances where AVERROR(EIO) was returned.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
by freeing it a bit earlier.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Converting explicit avio_flush() calls helps us to buffer more data and avoid
flushing the IO context too often which causes reduced IO throughput for
non-streamed file output.
The user can control FLUSH_POINT flushing behaviour using the -flush_packets
option, the default typically means to flush unless a non-streamed file output
is used, so this change should have no adverse effect on streaming even if it
is assumed that after an avio_flush() the output buffer is clean so small
seekbacks within the output buffer will work even when the IO context is not
seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
These instances are simply redundant or present because avio_flush() used to be
required before doing a seekback. That is no longer the case, aviobuf code does
the flush automatically on seek.
This only affects code which is either disabled for streaming IO contexts or
does no seekbacks after the flush, so this change should have no adverse effect
on streaming.
Signed-off-by: Marton Balint <cus@passwd.hu>
Removing explicit avio_flush() calls helps us to buffer more data and avoid
flushing the IO context too often which causes reduced IO throughput for
non-streamed file output.
The user can control flushing behaviour at the end of every packet using the
-flush_packets option, the default typically means to flush unless a
non-streamed file output is used.
Therefore this change should have no adverse effect on streaming, even if it is
assumed that a new packet has a clean buffer so small seekbacks within the
output buffer work even when the IO context is not seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
To make it consistent with other muxers.
The user can still control the generic flushing behaviour after write_header
(same way as after packets) using the -flush_packets option, the default
typically means to flush unless a non-streamed file output is used.
Therefore this change should have no adverse effect on streaming, even if it is
assumed that the first packet has a clean buffer, so small seekbacks within the
output buffer work even when the IO context is not seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
The documentation of both avio_open() as well as avio_open2() states
that on failure, the pointer to an AVIOContext given to this function
(via a pointer to a pointer to an AVIOContext) will be set to NULL. Yet
it didn't happen upon failure of ffurl_open_whitelist() or when allocating
the internal buffer failed. This commit changes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This will likely also fix CID 1452562, a false positive resulting from
Coverity thinking that av_dict_set() automatically frees its key and
value parameters (even without the AV_DICT_DONT_STRDUP_* flags).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Matroska muxer currently does not check the return value of
ff_isom_write_hvcc(), the function used to write mp4-style
HEVC-extradata as Matroska also uses it. This was intentionally done in
7a5356c72 to allow remuxing from mpeg-ts.
But if ff_isom_write_hvcc() fails, it has not output anything and the
file ends up without CodecPrivate and, if the input was Annex B, with
Annex B data, which is against the spec. So check the return value
again.
The underlying issue of not having extradata seems to have been fixed by
the introduction of the extract_extradata bitstream filter.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: "mypopy@gmail.com" <mypopy@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
to its actual behaviour: That it uses the least amount of bytes unless
overridden.
The current documentation leaves it undefined how many bytes will be used
when no number to use has been given explicitly. But several estimates
(used to write EBML Master elements with a small length field) require
this number to be the least amount of bytes to work. Therefore change
the documentation; and remove a comment about writing length fields
indicating "unkown length". It has been outdated since 0580a122.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When vobsub_read_packet() reads a packet, it uses a dedicated AVPacket
to get the subtitle timing and position from an FFDemuxSubtitlesQueue
(which has been filled with this data during reading the idx file in
vobsub_read_header); afterwards the actual subtitle data is read into
the packet destined for output and the timing and position are copied
to this packet. Afterwards, the local packet is unreferenced.
This can be simplified: Simply use the output packet to get the timing
and position from the FFDemuxSubtitlesQueue. The packet's size will be
zero afterwards, so that it can be directly used to read the actual
subtitle data. This makes copying the packet fields as well as
unreferencing the local packet unecessary and also removes an instance
of usage of sizeof(AVPacket) in libavformat.
The only difference is that the returned packet will already be flagged
as a keyframe. This currently only happens in compute_pkt_fields().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
