Partially undoes commit 2c4e08d893:
riff: always generate a proper WAVEFORMATEX structure in
ff_put_wav_header
A new flag, FF_PUT_WAV_HEADER_FORCE_WAVEFORMATEX, is added to force the
use of WAVEFORMATEX rather than PCMWAVEFORMAT even for PCM codecs.
This flag is used in the Matroska muxer (the cause of the original
change) and in the ASF muxer, because the specifications for
these formats indicate explicitly that WAVEFORMATEX should be used.
Muxers for other formats will return to the original behavior of writing
PCMWAVEFORMAT when writing a header for raw PCM.
In particular, this causes raw PCM in WAV to generate the canonical
44-byte header expected by some tools.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The rational for this is another issue that plex has exposed. When it is
conducting a transcode of video to HLS for streaming, my father noticed
artifacts when played on his GoogleTV (NSZ-GT1). He sent me a test file
and I reproduced it on my device of the same model. It is important to
note that the artifacts were not present when streaming to VLC or QuickTime
Player. I copied the command-line that plex used, and conducted all of the
following tests using FFmpeg git.
Transcode to HLS: artifacts on playback
Transcode to TS: playback is fine
Cat HLS segments into a single TS: playback is fine
Segment single TS file to segments: artifacts on playback
Segment single TS file to segments using Apple's HLS segmenter: playback is
fine
At this point I carefully examined the differences between Apple's HLS
segmenter output and FFmpeg's. Among the considerable differences, I
noticed that the video PES packets always had a 0 length. So I continued:
Transcode to HLS using FFmpeg with 0 length PES packets: playback is fine.
Segment single TS to segments with 0 length PES packets: playback is fine.
All failures mentioned are only on the GTV since it is the only player on
which I could reproduce artifacts. I only tested the GTV, VLC, and
QuickTime Player though, so my test case is limited. I do not know if
other players exhibit this issue.
Since it was useful last time, I have uploaded the test file as
hls_pes_packet_length.m4v along with its associated txt file which contains
the transcode command-line that was used.
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '911fa05b514e1be009e00b79d7004b93717c023b':
mvc: Specify the pixel format for the mv-mvc* tests
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also set the RGBA pixel format correctly as the native endian format,
which is what it returns.
This fixes the tests on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
This should avoid slight differences in the output causes by input
size alignment differences between archs
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes conversion of pal8 to rgb formats with alpha.
Updated references for 2 FATE tests which previously encoded fully
transparent images.
Based on a patch by Baptiste Coudurier <baptiste.coudurier@gmail.com>
If 384k is too high for the samplerate, choose the closest
possible
Idea to increase the bitrate from: 46439e1562
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This causes us to favor RGB8 over PAL8 when FF_LOSS_COLORQUANT is used
It probably makes sense to reinvestigate the exact scoring of pal8 when
our pal8 support improves to be supperior to rgb8
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '60fd7d36c47d62d4c603bf16c213b1a924f5cfcf':
fate: correctly set sample rate for mp2 tests
Conflicts:
tests/fate/acodec.mak
tests/lavf-regression.sh
one hunk has been ommited as it breaks fate
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '92b099daf4b8ef93513e38b43899cb8458a2fde3':
swscale: support converting YVYU422 pixel format
Conflicts:
libswscale/input.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
mpeg12enc: always set closed gop flag on the first gop
mpeg12enc: always write closed gops for intra only outputs
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '66d04c068a30751750818dcfbb6555ab74eb3f6d':
fate: Explicitly use gray16le in fate-sgi-gray16
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Improves compatibility with XDCAM HD formats. It has been set for a long time
in ffmbc.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '3e4e2142d246699a1a3a0045ba7124b18bc34d7a':
fate: Convert the paletted output in the brenderpix tests to rgb24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Improves rgb -> gray16 conversion
Fixes Ticket3422
The pam and png output files look visually similar, in both cases the
dynamics increase to 0x0 -> 0xfffb.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add a test for the ONE_STR mapping mode of the channelmap filter
Conflicts:
tests/fate/filter-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Extrapolate audio timestamps based on the number of samples demuxed.
Deal with some MXF nastiness involving fractional number of
samples per EditUnit when seeking (the specs handwave this away).
Further fixes from Tomas Härdin.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
tiny_ssim is build on the host, not the target and the HAVE_* are set for the
target.
This patch fixes building tiny_ssim when HAVE_* differed between target and host
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.
Also sets slices to 1 for the Ut Video encoder tests to keep them
green.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.
Also sets slices to 1 for the Ut Video encoder tests to keep them
green.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The old one didn't use segmentation. One uses segmentation in all frame
types (--aq-mode=1), and the other uses all segmentation features, but
only in inter frames (mbgraph).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This disables backward probability updates, which makes the codec more
friendly for frame-level multi-threading.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'b5f851ed7e59f88b4130a420033d9fe191ec9e2f':
FATE: force FLAC in the lavf ogg test
Conflicts:
tests/lavf-regression.sh
See: 28caf13ac3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: force the simple idct for xvid custom matrix test
Conflicts:
tests/fate/xvid.mak
tests/ref/fate/xvid-custom-matrix
See: ef034cbf18
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The original test without a forced idct is still useful since it tests
the switching of the idct algorithm/permutation on x86 with MMX. MMXext
or SSE2. Make sure the test runs only if MMX inline asm is available and
force -cpuflags to all.
Add the required bitexact flag for both tests.
Even though the most common framerate for RoQ is 30fps,
the format supports other framerates too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
no changes in either standard deviation or PSNR is seen in any of the changed fate
cases
MSE changes from 0.05012422 to 0.04890000
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fate test is changed because the reference file depends on the use of
non cleared data at the very
end. Alternatively we could upload a new reference file, though that would
then have to be changed every time the handling of a truncated frame changes
or theres a change to error concealment, each time adding a new file ...
Fixes use of uninitialized memory
Fixed: msan_uninit-mem_7f3c02b81363_2787_RLG2_19.rm
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ca96e337169093979d7c763064ad9dae12b3108c':
vp9: drop support for real (non-emulated) edges
Conflicts:
libavcodec/vp9block.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ef8c93e2f18c624d0c266687e43ab99af7921dd3':
vp8: drop support for real (non-emulated) edges
Conflicts:
tests/fate/vpx.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
* commit '9d18a7d3ec09d6d933d648570643fde924aa391a':
fate: Update AAC ELD 5.1 ref for recent bugfixes.
also reenable fate-aac-er_ad6000np_44_ep0, as this commit updates the pcm
reference, so that the test works again
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b2212dec0f011893ec68eecaa990170fa24050d7':
aac: Fix TNS decoding for the 512 sample window family.
also temporarily disable fate-aac-er_ad6000np_44_ep0 as this commit
causes a mismatch with the reference pcm file
The test will be reenabled after all fixes and with a new pcm reference
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b318106fae65149356934fc72feafef3272fd4ea':
FATE: add a test for the lavr mixing case fixed in fc6a3ef40d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a8cc88b1a23dc1515f27cfa98af16a273c539091':
tests/Makefile: allow FILTER* to be called with lists of filter names
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: Explicitly specify the pixel format for the pngparser test
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The RGB32 pixel format is RGBA/BGRA depending on target
endianness - make sure to convert it to one specific format for
the framecrc tests.
This fixes the pngparser fate test on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'cfb4ee30977732674d30c20e93a761c33c743972':
fate: add a pngparser test
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eddff165b4cdc1f064245a4bad6f4265581c12b1':
fate: add utility function to test parser, demuxer, and decoder
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is useful for debugging.
Reference and ffprobe.xsd changes done and tested by Stefano Sabatini.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Since we don't write lavf's string when bitexact is requested, this will
prevent the tag from being copied from the source stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '58a868968df445068a143f327ced03b6a02baf0d':
FATE: drop the last partial frame in the wmv8-drm test
Conflicts:
tests/ref/fate/wmv8-drm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The encoder uses almost none of the mpegvideo infrastructure, only some
fields from MpegEncContext.
The FATE results change because now an all-zero quant matrix is written
into the file. Since it is not used for anything for ljpeg, this should
not be a problem.
This makes the USE_FLOATS == 0 available to the end user
More float optimizations can easily be added as well now
common code should be factored out into a common file once all
fixed point & floating point optimizations are done, this is to
avoid having to move code back and forth between files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The old one didn't use segmentation. One uses segmentation in all frame
types (--aq-mode=1), and the other uses all segmentation features, but
only in inter frames (mbgraph).
* commit '874838dc6589d978611c89a40694a5074f892a76':
fate: add one select filter test
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This changes the tests that used the internal hevc checksum to use framecrc
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Conflicts:
tests/fate/hevc.mak
tests/ref/fate/hevc-conformance-DBLK_A_SONY_3
tests/ref/fate/hevc-conformance-DBLK_B_SONY_3
tests/ref/fate/hevc-conformance-DBLK_C_SONY_3
tests/ref/fate/hevc-conformance-DELTAQP_B_SONY_3
tests/ref/fate/hevc-conformance-DELTAQP_C_SONY_3
tests/ref/fate/hevc-conformance-POC_A_Bossen_3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A few fate instances on OS/2, OpenBSD, FreeBSD and IA64 linux currently
still fail a few tests with a maxdiff of 6.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '68edd5be0980941924ae633d98589d56a8091bbd':
FATE: use proper comparison mode in the lavr tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The tests are disabled as 2 do not pass yet
(fate-hevc-conformance-PPS_A_qualcomm_7 and fate-hevc-conformance-RAP_A_docomo_4)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '364af376f343d4706c4cdb7ab9fe0863994e6c01':
FATE: add lavr resampling tests
The tests do not pass, and thus where disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ab5f7107d2f1411e9fda6c36af64524e5ed31d1':
FATE: add lavr mixing tests
The tests do not pass, and thus where disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Here is an extract of fate-samples/sub/vobsub.idx, with an additional
text at the end of each line to better identify each bitmap:
timestamp: 00:04:55:445, filepos: 00001b000 Ace!
timestamp: 00:05:00:049, filepos: 00001b800 Wake up, honey!
timestamp: 00:05:02:018, filepos: 00001c800 I gotta go to work.
timestamp: 00:05:02:035, filepos: 00001d000 <???>
timestamp: 00:05:04:203, filepos: 00001d800 Look after Clayton, okay?
timestamp: 00:05:05:947, filepos: 00001e800 I'll be back tonight.
timestamp: 00:05:07:957, filepos: 00001f800 Bye! Love you.
timestamp: 00:05:21:295, filepos: 000020800 Hey, Ace! What's up?
timestamp: 00:05:23:356, filepos: 000021800 Hey, how's it going?
timestamp: 00:05:24:640, filepos: 000022800 Remember what today is? The 3rd!
timestamp: 00:05:27:193, filepos: 000023800 Look over there!
timestamp: 00:05:28:369, filepos: 000024800 Where are they going?
timestamp: 00:05:28:361, filepos: 000025000 <???>
timestamp: 00:05:29:946, filepos: 000025800 Let's go see.
timestamp: 00:05:31:230, filepos: 000026000 I can't, man. I got Clayton.
Note the two "<???>": they are basically split subtitles (with the
previous one), which the dvdsub decoder is now supposed to reconstruct
with a previous commit. But also note that while the first chunk has
increasing timestamps,
timestamp: 00:05:02:018, filepos: 00001c800
timestamp: 00:05:02:035, filepos: 00001d000
...it's not the case of the second one (and this is not an exception in the
original file):
timestamp: 00:05:28:369, filepos: 000024800
timestamp: 00:05:28:361, filepos: 000025000
For the dvdsub decoder, they need to be "filepos'ed" ordered, but the
FFDemuxSubtitlesQueue is timestamps ordered, which is the reason of the
introduction of a sub sort method in the context, to allow giving
priority to the position, and then the timestamps. With that change, the
dvdsub decoder get fed with ordered packets.
Now the packet size estimation was also broken: the filepos differences
in the vobsub index defines the full data read between two subtitles
chunks, and it is necessary to take into account what is read by the
mpegps_read_pes_header() function since the length returned by that
function doesn't count the size of the data it reads. This is fixed with
the introduction of total_read, and {old,new}_pos. By doing this change,
we can drop the unreliable len16 heuristic and simplify the whole loop.
Note that mpegps_read_pes_header() often read more than one PES packet
(typically in one call it can read 0x1ba and 0x1be chunk along with the
relevant 0x1bd packet), which triggers the "total_read + pkt_size >
psize" check. This is an expected behaviour, which could be avoided by
having a more chunked version of mpegps_read_pes_header().
The latest change is the extraction of each stream into its own
subtitles queue. If we don't do this, the maximum size for a subtitle
chunk is broken, and the previous changes can not work. Having each
stream in a different queue requires some little adjustments in the
seek code of the demuxer.
This commit is only meaningful as a whole change and can not be easily
split. The FATE test changes because it uses the vobsub demuxer.
Fixes sync in some samples (e.g. bugs 7581 and 8374 in VLC).
Based on a commit by Matthieu Bouron <matthieu.bouron@gmail.com>
Reported-by: Jean-Baptiste Kempf <jb@videolan.org>
CC: libav-stable@libav.org
This may improve compatibility of lgpegs generated by libavcodec
also encoded ljpegs become slightly smaller
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f1eac2b8a0370b908cd691086d11f51342054730':
movenc: Use keyframes as default fragmentation point in ismv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For codecs where decoding of a whole plane can simply
be skipped, we should offer applications to not decode
alpha for better performance (ca. 30% less CPU usage
and 40% reduced memory bandwidth).
It also means applications do not need to implement support
(even if it is rather simple) for YUVA formats in order to be
able to play these files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Use it only on subtitle CuePoints.
With proper demuxer/splitter support this should improve the display
of subtitles right after seeking to a given point in the stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Files won't validate with mkvalidtor if these two elements are missing.
Use a const "Lavf" string that wont change with library version bumps.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The muxer has been creating files with v4 elements for some time now,
and especially now that we can mux non-experimental Opus files, reporting
the DocTypeVersion as 2 is not correct.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On openbsd the exif-image-jpg test fails but diff treats the files as
binary due to some non ascii symbols in them. This should force it to
treat them as text, which should result in more informative output
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The fate tests change as they used 1.2 previously
The increased size is due to:
32bit CRCs per slice by default (can be disabled),
it adds slice headers to allow decoding one slice without the others
an additional slice size field is added to make it possible to find
slices within corrupted surroundings.
these add up to about 57bit per slice more
at 50 frames and 4 slices thats 1425 byte
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Update the fate reference since the last broken frame is not decoded
anymore.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The bug it was working seems to have been fixed.
This change causes ffmpeg to use the trim filter to implement
the -t option.
FATE tests are updated due to the more accurate handling of
the last packets.
Iterative implementation of 32 bit fixed point split-radix FFT.
Max FFT that can be calculated currently is 2^12.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
for the n0=0 case there are multiple solutions and different
platforms pick different ones
This should reduce the issues with fate and the timefilter test
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '711c4da1af71e0d26ca93626a3c2dd48821f1cc7':
fate: Add tree test
Conflicts:
tests/fate/libavutil.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The option is used to sort the streams by program.
Signed-off-by: Florent Tribouilloy <florent.tribouilloy@smartjog.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Only check dependencies if invoking the make targets 'check'
or anything matching 'fate%' except 'fate-rsync'.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a minimal change to matroskaenc that implements CueRelativePosition in the output.
Most players will probably ignore this additional information, but it is in the
matroska spec, and it'd be nice to be able to make use of it.
Signed-off-by: Bernt Habermeier <bernt@wulfram.com>
Tested-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tags must have at least one SimpleTag element to be spec conformant.
Updated lavf-mkv and seek-lavf-mkv FATE references as the tests were affected by
this.
Fixes ticket #2785
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes speex in rtmp
Fixes Ticket2409
the nellymoser in flv case actually needs larger analyzeduration. The code
previously just failed to calculate the duration
If this causes any problems, like premature analyze/probe end, please report!
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6516632967da5e6bd7d6136e8678f826669ed26e':
tests: Only run noproxy test if networking is enabled
fifo: K&R formatting cosmetics
Conflicts:
libavformat/Makefile
libavutil/fifo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When operating on subsampled chroma planes, some rounding is taking
place. The left and top borders are rounded down while the width and
height are rounded up, so all rounding is done outward to guarantee the
logo area is fully covered.
The problem is that the width and height are counted from the
unrounded left and top borders, respectively. So if the left or top
border position has indeed been rounded down, and the width or height
needs no rounding (up), the position of the the right or bottom border
will be effectively rounded down, i.e. inward.
The issue can easily be seen with a yuv240p input and
-vf delogo=45:45:60:40:show=1 -vframes 1 delogo-bug.png
(or virtually any logo area with odd x and y and even width and
height.) The right and bottom chroma borders (in green) are clearly
off.
In order to fix this, the width and height must be adjusted to include
the bits lost in the rounding of the left and top border positions,
respectively, prior to being themselves rounded up.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The original delogo algorithm interpolates both horizontally and
vertically and uses the average to compute the resulting sample. This
works reasonably well when the logo area is almost square. However
when the logo area is significantly larger than high or higher than
large, the result is largely suboptimal.
The issue can be clearly seen by testing the delogo filter with a fake
logo area that is 200 pixels large and 2 pixels high. Vertical
interpolation gives a very good result in that case, horizontal
interpolation gives a very bad result, and the overall result is poor,
because both are given the same weight.
Even when the logo is roughly square, the current algorithm gives poor
results on the borders of the logo area, because it always gives
horizontal and vertical interpolations an equal weight, and this is
suboptimal on borders. For example, in the middle of the left hand
side border of the logo, you want to trust the left known point much
more than the right known point (which the current algorithm already
does) but also much more than the top and bottom known points (which
the current algorithm doesn't do.)
By properly weighting each known point when computing the value of
each interpolated pixel, the visual result is much better, especially
on borders and/or for high or large logo areas.
The algorithm I implemented guarantees that the weight of each of the
4 known points directly depends on its distance to the interpolated
point. It is largely inspired from the original algorithm, the key
difference being that it computes the relative weights globally
instead of separating the vertical and horizontal interpolations and
combining them afterward.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tha fate tests change because the edge mirroring was wrong before this commit
Reviewed-by: Nicolas BERTRAND <nicoinattendu@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adding an arbitrary amount of padding bytes at the end of the
ID3 metadata fixes cover art display for some software (iTunes,
Traktor, Serato, Torq).
For reference (ID3 metadata):
[ Apic frames ] -> cover doesn't show up
[ Apic frames, Padding ] -> ok
[ Apic frames, ID3 frames ] -> ok
[ ID3 frames, Apic frames ] -> cover doesn't show up
[ ID3 frames, Apic frames, Padding ] -> ok
* qatar/master:
doc: Mention the target_samples and ld variables for fate configs
fate.sh: Allow specifying --as via a specific variable
Conflicts:
doc/fate.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d2d6a4883479403798f4ed46941d5b365823570':
lavf: add a raw WavPack muxer.
apetag: add support for writing APE tags
matroskaenc: support muxing WavPack
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/apetag.h
libavformat/version.h
libavformat/wvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4a27a52a1f74016095b7aee1b4a422cf62217ade':
fate: Don't use files from SRC_PATH in the actual tests
indeo4: reuse context block VLC for band instead of defaulting
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The quantization code needs more work, not so much work
merging but more work investigating what is correct.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If building out of tree, make sure the filter scripts are copied
into the build tree before running tests. This makes sure that
SRC_PATH doesn't need to exist on the remote system (or doesn't
need to exist at the same path).
Signed-off-by: Martin Storsjö <martin@martin.st>
This more evenly distributes the load between threads
This also fixes the chroma filtering where the filter was applied twice
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array writes
No FFmpeg release is affected by this
This also fixes some artifacts
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the "build_only" variable is set in the configuration file, the
FATE client will skip running tests and just compile all targets.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8e673efc6f5b7a095557664660305148f2788d30':
prores: update FATE test to account for alpha plane present in the test sample
configure: Add basic valgrind-massif support
Conflicts:
tests/fate/prores.mak
tests/ref/fate/prores-alpha
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by ffmpeg state
that they are 'piff' compatible via 'ftyp' box, this needs to be corrected.
[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup.
This should also fix I/BI field pictures.
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs.
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>.
Signed-off-by: Martin Storsjö <martin@martin.st>
