* commit '18fb38fb9ea7e2d5997c096fccfcd4cb43f70294':
mov: Remove a variable that is set but never used
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '52a1c32c0a86e84d43f977c5148e62975a0c6917':
nut: Use nut->version in the version range check
Conflicts:
libavformat/nutdec.c
Note, this bug did not affect ffmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '865461099e062de5a3a109c2a5be98004c11d8bd':
librtmp: Don't free the temp url at the end of rtmp_open
Conflicts:
libavformat/librtmp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
librtmp can keep pointers to this string internally, and may
use them at shutdown as well.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
According to doc, ssh_userauth_none must be called before ssh_userauth_list.
It solves login issue for new versions of libssh.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Most FTP servers enable UTF-8 by default, but it is not required by the standard.
Enabling it manually makes ffmpeg implementation more consistent when server
doesn't enable it by default.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
* commit '9279826008b80daad7446950a821f32033ccd33f':
id3v2enc: use a case-insensitive comparison for APIC picture type
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This typo has existed since this code was added in c16582579.
Newer versions of clang pointed out that this comparison always
was true (since the result of the negation is either 0 or 1, while
AVDISCARD_ALL has the value 48).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b75a1f9892b5b715397edbf837e4d4cda337907b':
matroska: Factor out write_track from mkv_write_tracks
Conflicts:
libavformat/matroskaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
default-base-is-moof shall be set to track fragments compatible with DASH
Media Segments. So, this is a fundamental support for ISOBMFF ver. DASH.
This is meaningful only when base-data-offset-present is absent and two or
more track fragments are present in a movie fragment.
Signed-off-by: Martin Storsjö <martin@martin.st>
Approved-by: Tomas Härdin <tomas.hardin@codemill.se>
Approved-by: tim nicholson <nichot20@yahoo.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f4edf012593c73941caa0ef9b292da00225c3df':
dump_stream: print the timebase as is, do not reduce it
See: 75511c293a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It makes more sense to print the timebase exactly as it is set. Also,
this avoids a divide by zero when av_dump_format() is called on a format
context before writing the header.
There are interoperability issues with D-10 related to the channelcount property in the generic sound essence descriptor.
On one side, SMPTE 386M requires channel count to be 4 or 8, other values being prohibited.
The most widespread value is 8, which seems straightforward as it is the actual size of the allocated structure/disk space.
At the end, it appears that some vendors or workflows do require this descriptor to be 8, and otherwise just "fail".
On the other side, at least AVID and ffmpeg do write/set the channel count to the exact number of channels really "used",
usually 2 or 4, or any other value. And on the decoding side, ffmpeg (for example) make use of the channel count for probing
and only expose this limited number of audio streams
(which make sense but has strong impact on ffmpeg command line usage, output, and downstream workflow).
At the end, I find it pretty usefull to simply give ffmpeg the ability to force/set the channel count to any value the user wants.
(there are turnaround using complex filters, pans, amerge etc., but it is quite boring and requires the command line to be adapted to the input file properties)
Reviewed-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
As indicated in the function documentation, the header MUST be
checked prior to calling it because no consistency check is done
there.
CC:libav-stable@libav.org
It seems it is more secure to simply duplicate the computing routine from compute_pkt_fields to estimate_timings_from_pts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '194be1f43ea391eb986732707435176e579265aa':
lavf: switch to AVStream.time_base as the hint for the muxer timebase
Conflicts:
doc/APIchanges
libavformat/filmstripenc.c
libavformat/movenc.c
libavformat/mxfenc.c
libavformat/oggenc.c
libavformat/swf.h
libavformat/version.h
tests/ref/lavf/mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd754ed41727b1fcbab335b510248a9758a73320c':
riffenc: take an AVStream instead of an AVCodecContext
Conflicts:
libavformat/nutenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f792d3cbb8e8e35c54a9358a55dd596b7a40f228':
lavf: add the notimestamps flag to the muxers missing it
Conflicts:
libavformat/adtsenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cfbdd7ffbd9fe14d110fd1bb89bf52f0f7bde016':
rtpenc: base max_frames_per_packet on avg_frame_rate, not codec timebase
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.
The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
It has not been properly maintained for years and there is little hope
of that changing in the future.
It appears simpler to write a new replacement from scratch than
unbreaking it.
* commit '711aa2a82727907f778fb8aa9a93aff2120170f2':
lavf: dump stream side data when probing
Conflicts:
libavformat/dump.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2dc265619a2fc9c6f9aff7ac2bcdbcb90e9610cb':
lavf: group dump functions together
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f121dbd9f76031d7f6d56261be2f14937a19d2dd':
mpegts: Provide an option to override the pcr period
Conflicts:
doc/muxers.texi
libavformat/mpegtsenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f7e94eccd1c0d64679f2c4eda8bb942a158dfac':
mpegts: Move the option section to the bottom
Conflicts:
libavformat/mpegtsenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix a change that was broken by [1]. Cues must be added for audio frames
on cluster start for WebM when the DASH flag is passed. Restoring
correct functionality.
[1] http://goo.gl/xYLq7Z
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On big endian machines, the default value set via the faulty
AVOption ended up as 2^32 times too big.
This fixes the fate-lavf-ogg test which currently is broken on
big endian machines, broken since 3831362. Since that commit,
a final zero-sized packet is written to the ogg muxer in that test,
which caused different flushing behaviour on little and big endian
depending on whether the pref_duration option was handled as it
should or not.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The '?xyz' form is used by android devices (and according to apple
mailing list archives, also by older iOS devices). The 'loci' field
(defined in 3GPP 26.244) is used by recent iOS devices.
Even though the loci field can contain an altitude, it was plain
0 in my sample. Just export longitude and latitude, in a string
format matching the one used by the '?xyz' metadata field.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '95b7fa1729b93bbb3f4fb85a5c0cb53cf970c3c7':
oggenc: Support flushing the muxer
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the caller to write all buffered data to disk, allowing
the caller to know at what byte position in the file a certain
packet starts (any packet written after the flush will be located
after that byte position).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '59cb5747ec3c5cd842b94e574c37889521c97cc4':
rtmpproto: read metadata to set correct FLV header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3b18857ab301d2a0b3e86e9d85eed76f0798a29c':
rtmppkt: Add method to read an AMF string that is not prefixed by its type
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a1859032e39d96352687186fd179e1559dea2aca':
flvdec: Do not default to a video and audio stream
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In the presence of no metadata, do not set any stream flag in the FLV
header but let the demuxer handle the detection and creation of streams
as data arrives.
Signed-off-by: Martin Storsjö <martin@martin.st>
