These arrays have a size of 180 resp. six bytes. This does not
make it worthwhile to export them due to the overhead this occurs;
for x64 Elf/Linux/GNU: 2x2B version, 2x24B .dynsym, 24B .rela.dyn,
8B .got, 4B hash + twice the size of the name (here 20+23B).
Therefore these symbols are unavprived and duplicated for shared
builds.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
avpriv_mpeg4audio_sample_rates has a size of 64B and it is currently
avpriv; a clone of it exists in aacenctab.h and from there it is inlined
in aacenc.c (which also uses the avpriv version) and in the FLV muxer.
This means that despite it being avpriv both libavformat as well as
libavcodec have copies already.
This situation is clearly suboptimal. Given the overhead of exporting
symbols (for x64 Elf/Linux/GNU: 2x2B version, 2x24B .dynsym, 24B .rela.dyn,
8B .got, 4B hash + twice the size of the name (here 31B)) the object is
unavprived, i.e. duplicated into libavformat when creating a shared
build; but the duplicates in the AAC encoder and FLV muxer are removed.
This involves splitting of the sample rate table into a file of its own;
this allowed to break some spurious dependencies (e.g. both the AAC
encoder as well as the Matroska demuxer actually don't need the
mpeg4audio_get_config stuff).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are seven MJPEG-tables, five small (1x12, 4x17) and two
not small (2x162). These are all avpriv, despite this not being
worthwhile due to the overhead of exporting a symbol: The total
overhead for each symbol consists of two entries in .dynsym (24B each),
one entry in the importing library's .rela.dyn (24B) and one in .got
(8B) as well as 2x2B for symbol versions and 4B for symbol hashes
in the exporting library; in addition to that, the name of the symbol
is included in both exporting and importing libraries, using 2x210 bytes
in this case.
(The above numbers are for a x64 Elf/Linux/GNU system. Other platforms
will give different numbers.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Said table is 64 bytes long and exported so that it can be used both
in libavcodec and libavformat. This commit stops doing so and instead
duplicates it for shared builds, because the overhead of exporting the
symbol is bigger than 64 bytes. It consists of the length of the name of
the symbol (2x24 bytes), two entries in .dynsym (2x24 bytes), two
entries for symbol version (2x2 bytes), one hash value in the exporting
library (4 bytes) in addition to one entry in the importing library's
.got and .rela.dyn (8 + 24 bytes).
(The above numbers are for a Linux/GNU/Elf system; the numbers for other
platforms may be different.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is small (16 B) and therefore the overhead of exporting it more
than outweighs the size savings from not having duplicated symbols:
When the symbol is no longer avpriv, one saves twice the size of
the string containing the symbols name (2x30 byte), two entries
in .dynsym (24 bytes each on x64), one entry in the importing libraries
.got and .rela.dyn (8 + 24 bytes on x64) and two entries for the
symbol version (2 bytes each) and one hash value in the exporting
library (4 bytes).
(The exact numbers are of course different for other platforms
(e.g. when using dlls), but given that the strings saved alone
more than outweigh the array size it can be presumed that this
is beneficial for all platforms.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
libavcodec currently exports four avpriv symbols that deal with
PixelFormatTags: avpriv_get_raw_pix_fmt_tags, avpriv_find_pix_fmt,
avpriv_pix_fmt_bps_avi and avpriv_pix_fmt_bps_mov. The latter two are
lists of PixelFormatTags, the former returns such a list and the second
searches a list for a pixel format that matches a given fourcc; only
one of the aforementioned three lists is ever searched.
Yet for avpriv_pix_fmt_bps_avi, avpriv_pix_fmt_bps_mov and
avpriv_find_pix_fmt the overhead of exporting these functions actually
exceeds the size of said objects (at least for ELF; the following numbers
are for x64 Ubuntu 20.10):
The code size of avpriv_find_pix_fmt is small (GCC 10.2 37B, Clang 11 41B),
yet exporting it adds a 20B string for the name alone to the exporting
as well as to each importing library; there is more: Four bytes in the
exporting libraries .gnu.hash; two bytes each for the exporting as well
as each importing libraries .gnu.version; 24B in the exporting as well
as each importing libraries .dynsym; 16B+24B for an entry in .plt as
well as the accompanying relocation entry in .rela.plt for each
importing library.
The overhead for the lists is similar: The strings are 23B and the
.plt+.rela.plt pair is replaced by 8B+24B for an entry in .got and
a relocation entry in .rela.dyn. These lists have a size of 80 resp.
72 bytes.
Yet for ff_raw_pix_fmt_tags, exporting it is advantageous compared to
duplicating it into libavformat and potentially libavdevice. Therefore
this commit replaces all library uses of the four symbols with a single
function that is exported for shared builds. It has an enum parameter
to choose the desired list besides the parameter for the fourcc. New
lists can be supported with new enum values.
Unfortunately, avpriv_get_raw_pix_fmt_tags could not be removed, as the
fourcc2pixfmt tool uses the table of raw pix fmts. No other user of this
function remains.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Improves readability and slightly decreases codesize.
While just at it, also remove a check whether the packet list is
nonempty before freeing it, as freeing an empty list is fine
and basically a no-op.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This removes one of the last usages of sizeof(AVPacket)
in the generic muxing code.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case of shared builds, some object files containing tables
are currently duplicated into other libraries: log2_tab.c,
golomb.c, reverse.c. The check for whether this is duplicated
is simply whether CONFIG_SHARED is true. Yet this is crude:
E.g. libavdevice includes reverse.c for shared builds, but only
needs it for the decklink input device, which given that decklink
is not enabled by default will be unused in most libavdevice.so.
This commit changes this by making it more explicit about what
to duplicate from other libraries. To do this, two new Makefile
variables were added: SHLIBOBJS and STLIBOBJS. SHLIBOBJS contains
the objects that are duplicated from other libraries in case of
shared builds; STLIBOBJS contains stuff that a library has to
provide for other libraries in case of static builds. These new
variables provide a way to enable/disable with a finer granularity
than just whether shared builds are enabled or not. E.g. lavd's
Makefile now contains: SHLIBOBJS-$(CONFIG_DECKLINK_INDEV) += reverse.o
Another example is provided by the golomb tables. These are provided
by lavc for static builds, even if one uses a build configuration
that makes only lavf use them. Therefore lavc's Makefile contains
STLIBOBJS-$(CONFIG_MXF_MUXER) += golomb.o, whereas lavf's Makefile
has a corresponding SHLIBOBJS-$(CONFIG_MXF_MUXER) += golomb_tab.o.
E.g. in case the MXF muxer is the only component needing these tables
only libavformat.so will contain them for shared builds; currently
libavcodec.so does so, too.
(There is currently a CONFIG_EXTRA group for golomb. But actually
one would need two groups (golomb_avcodec and golomb_avformat) in
order to know when and where to include these tables. Therefore
this commit uses a Makefile-based approach for this and stops
using these groups for the users in libavformat.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The packet given to muxers is not used afterwards; it is always
unreferenced by libavformat. Ergo muxers are allowed to keep
the references in the packets and e.g. move the ownership to
a packet list. This is what this commit does.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Improves code legibility by not using bit shifts.
Also avoids duplicating the dvcC/dvvC ISOM box writing code.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To avoid duplicating code. The implementation in dovi_isom is identical.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Adds handling of dvcC/dvvC block addition mappings.
The parsing creates AVDOVIDecoderConfigurationRecord side data.
The configuration block is written when muxing into Matroska,
if DOVI side data is present for the track.
Most of the Matroska element parsing is based on Plex's FFmpeg source code.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Both parse/write implementations are based on mov/movenc.
This only adds support for the "Dolby Vision configuration box".
Other configuration boxes, such as
"Dolby Vision enhancement layer configuration box" are not supported.
The new functions will be used to implement parsing/writing the DOVI config
for Matroska, as well as to refactor both mov/movenc to use dovi_isom functions.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
added "cache_redirect" option to http.
when enabled, requests issued after seek will use the latest redirected
url.
when disabled, each call to seek will revert to the original url that
was sent to http_open.
currently, the default remains 'enabled', until the next major
libavformat bump, where it will change to 'disabled'.
Very high stts sample deltas may occasionally be intended but usually
they are written in error or used to store a negative value for dts correction
when treated as signed 32-bit integers.
This option lets the user set an upper limit, beyond which the delta is clamped to 1.
Values greater than the limit if negative when cast to int32 are used to adjust onward dts.
Unit is the track time scale. Default is UINT_MAX - 48000*10 which
allows upto a 10 second dts correction for 48 kHz audio streams while
accommodating 99.9% of uint32 range.
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
We do not support this as we multiply by 1000
Fixes: signed integer overflow: -45318575073853696 * 1000 cannot be represented in type 'long'
Fixes: 42804/clusterfuzz-testcase-minimized-ffmpeg_dem_LIVE_FLV_fuzzer-4630325425209344
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The values for the essence element type were updated in the spec
from 0x05/0x06 (ST2019-4 2008) to 0x0C/0x0D (ST2019-4 2009).
Fixes ticket #6380.
Thanks-to: Philip de Nier <philip.denier@bbc.co.uk>
Thanks-to: Matthieu Bouron <matthieu.bouron@gmail.com>
Reviewed-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: division by zero
Fixes: 42814/clusterfuzz-testcase-minimized-ffmpeg_dem_MV_fuzzer-4787014237552640
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: John-Paul Stewart <jpstewart@personalprojects.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds support for concat demuxer to copy the side data information
from the input file to the resulting file. It will behave like the
metadata copy, where the metadata of the first file is kept in the
the output file.
Extract the current code that already performs the stream side_data
copy into a separate method and reuse the method in the concat demuxer.
Signed-off-by: Gerard Sole <g.sole.ca@gmail.com>
Resolves a warning that duration is being innaccurately estimated based
on bitrate.
Signed-off-by: John-Paul Stewart <jpstewart@personalprojects.net>
Reviewed-by: Peter Ross <pross@xvid.org>
Prior to this patch, for version 2 of the file format the frame rate was
hard-coded at 15 fps. This uses the 64-bit floating-point value from
the data stream, similar to what is already done for version 3 of the
file format (around line 206).
Signed-off-by: John-Paul Stewart <jpstewart@personalprojects.net>
Reviewed-by: Peter Ross <pross@xvid.org>
There is no mxfenc dependency any more since commit
b9a26b9d55.
Also remove a dnxhddata.h inclusion in mxfenc that was forgotten
in the very same commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Return error codes when constructing a stream config fails, rather than
just disregarding the failure and continuing.
Propagate the error codes from av_sdp_create().
Fixes: signed integer overflow: 9223372036200463215 + 1109914409 cannot be represented in type 'long'
Fixes: 41480/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-6553086177443840
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: division by zero
Fixes: 42198/clusterfuzz-testcase-minimized-ffmpeg_dem_MV_fuzzer-5054366405492736.fuzz
Fixes: 42222/clusterfuzz-testcase-minimized-ffmpeg_dem_MV_fuzzer-4561249331970048
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Because the s->buffer has been freed by av_freep in avio_closep.
It should not av_freep the buffer in label fail after avio_closep.
Then just move the av_freep before avio_closep and remove the label fail.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Zhao Zhili <zhilizhao@tencent.com>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
This piece of code has been added as FFmpeg's answer to
infinite loops in try_decode_frame() in commit
6072a19b4f. There is no loop
around try_decode_frame() any more, so this code can be removed.
This code is only triggered in case a) the codec parameter could
not be determined, b) the decode delay could not be guessed or
c) no packet was ever encountered and the encoder has the
AV_CODEC_CAP_CHANNEL_CONF. In these cases the new code will
no longer emit a "decoding for stream %d failed" message, which is
prima facie false. In case a) an additional "Could not find codec
parameters" message is (and will be) emitted. No warning will be
emitted any more in case b) (this happens e.g. with some
h264-conformance FATE-files).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When flushing, try_decode_frame() itself loops until the desired
properties have been found or the decoder is drained.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Because the hls_ts_options will be misunderstand by user,
and then user can use hls_segment_options instead of hls_ts_options.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Because the hls_ts_options will be misunderstand by user that only can
be used in mpegts segments option. So add this option for segments.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Otherwise there is no way to detect an error returned by avio_close() because
ff_format_io_close cannot get the return value.
Checking the return value of the close function is important in order to check
if all data was successfully written and the underlying close() operation was
successful.
It can also be useful even for read mode because it can return any pending
AVIOContext error, so the user don't have to manually check AVIOContext->error.
In order to still support if the user overrides io_close, the generic code only
uses io_close2 if io_close is either NULL or the default io_close callback.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: shift exponent 4294967163 is too large for 32-bit type 'int'
Fixes: 41449/clusterfuzz-testcase-minimized-ffmpeg_IO_DEMUXER_fuzzer-6183636217495552
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Don't use different src and dst in av_tea_crypt(); use in-place
modifications instead. Also let av_tea_crypt() encrypt all three
blocks in one call.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We use ECB, not CBC mode here, so one does not need to reinitialize
the context; for the same reason, one can also just let av_tea_crypt()
loop over the blocks, avoiding a loop here.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, the packets have been read in blocks of at most
eight bytes at a time; then these blocks have been decrypted
and copied into a buffer on the stack (that was double the size
needed...). From there they have been copied to the dst packet.
This commit changes this: The data is read in one go; and
the decryption avoids temporary buffers, too, by making
use of the fact that src and dst of av_tea_crypt() can coincide.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Due to this bush.aa (from the FATE suite) exported garbage metadata
with key "_040930".
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The concatf protocol returns an opaque error on open if
concatf list file contains trailing newlines.
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
Reviewed-by: James Almer <jamrial@gmail.com>
Instead of storing the protocol pointer in the opaque iteration state,
store just the index of the next protocol, similarly to how
ff_urlcontext_child_class_iterate() works.
Silences e.g. the following warning in gcc 10:
src/libavformat/ftp.c: In function ‘ftp_move’:
src/libavformat/ftp.c:1122:46: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4091 [-Wformat-truncation=]
1122 | snprintf(command, sizeof(command), "RNTO %s\r\n", path);
| ^~ ~~~~
src/libavformat/ftp.c:1122:5: note: ‘snprintf’ output between 8 and 4103 bytes into a destination of size 4096
1122 | snprintf(command, sizeof(command), "RNTO %s\r\n", path);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This reduces codesize because the offsets of commonly used elements
are now smaller and thus need less bytes to encode in ptr+offset
addressing modes (with GCC 11.2 on x64: 0x1b8b -> 0x1a7b).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The documentation states that here 0 should be used for read-only and
1 for a writable buffer. AVIO_FLAG_WRITE however is 2, while it works
due to the way the flag is handled internally, it is still wrong
according to the documentation.
Additionally it makes it seem as if the AVIO_FLAG_* values could be used
here, which is actually not true, as when AVIO_FLAG_READ would be used
here it would create a writable buffer as AVIO_FLAG_READ is defined as 1.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
this allows getting rid of the hardcoded max size of SDP.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The number of audio channels is stored after the magic number
identifying the audio format. Prior to this patch the code has been
reading it earlier, causing files with only one audio channel to be
handled incorrectly.
Reviewed-by: Peter Ross <pross@xvid.org>
Adds demuxer for Square Enux SCD files.
Based off [1] and personal investigation.
This has only been tested against Drakengard 3 (PS3) *_SCD.XXX files
(big-endian). As it is highly likely that FFXIV (PC) files are little-endian,
this demuxer is marked as experimental until this can be confirmed.
[1]: http://ffxivexplorer.fragmenterworks.com/research/scd%20files.txt
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Currently they are ordered as-written (i.e. by increasing position);
in case av_interleaved_write_frame() is used, this is (mostly)
the same as ordered by increasing dts.
Yet the Matroska specification strongly recommends (SHOULD) that
the CuePoints be sorted by CueTime. mkvalidator warns when they are
not. Therefore this commit sorts them accordingly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If fifo_thread_recover() succeeds immediately after
fifo_thread_dispatch_message() fails, the dts of the packet is scaled
twice, causing cur_dts to be abnormally large and "Application provided
invalid, non monotonically increasing dts to muxer in stream" to occur
repeatedly.
Steps to reproduce:
1. ffmpeg -f lavfi -i testsrc -c:v libx264 -map 0:v -flags +global_header -f fifo -fifo_format flv -attempt_recovery 1 -recover_any_error 1 rtmp://example.com/livekey
2. set a breakpoint on fifo_thread_recover
3. force disconnect from the rtmp server
4. wait for break
5. reconnect to the rtmp server
6. resume execution of ffmpeg
Signed-off-by: Ryoji Gyoda <gy.cft4@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
FLV AMF tags have a 24bit field for timestamps plus an 8bit for extended
timestamps.
All FLV AMF tags except when we write metadata handle this correctly
using the put_timestamp function.
Until now when writing metadata we were only using the first
24 bits and thus the timestamp value was wraping around 4 hours 40
minutes (16,800,000 ms, max 24 bit value 16,777,216) of playback.
This commit fixes this applying this same function put_timestamp
for the metadata FLV tag.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: -776522110086937600 * 16 cannot be represented in type 'long'
Fixes: 40563/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-6644829447127040
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Due to reasons, mpv doesn't pass filename when probing. mpv also sets
default probescore threshold to 26. Since the current jpeg_probe
implementation returns 25 until EOI, it means that the whole image needs
to be probed to succeed. Worse, the whole image is not passed at once;
increasingly large buffers are tried before that. Adding it up together,
if many demuxers are enabled, moderately large JPEG files (few MB) can
take several seconds to open, despite taking less than 1 second to
actually decode.
Therefore, adjust the heuristic to be more optimistic if proper JFIF or
Exif segments are found. While not strictly required, the vast majority
of JPEG-ish files have one or the other or both.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For most check_bitstream() functions this just avoids having
to dereference s->streams[pkt->stream_index] themselves; but for
meta-muxers it will allow to forward the packet to stream with
a different stream_index (belonging to a different AVFormatContext)
without using a spare packet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
path1 and sanitized_path are both MAX_URL_SIZE bytes long, yet the latter is
copied from the former with the addition of one extra character.
Should fix a -Wformat-truncation warning.
Signed-off-by: James Almer <jamrial@gmail.com>
As per 8.6.1.2.2 of ISO/IEC 14496-12:2015(E), STTS sample offsets
are to be always stored as uint32_t. So far, they have been signed ints
which led to desync in files with very large offsets.
The MOVStts struct was used to store CTTS offsets as well. These can be
negative in version 1. So a new struct MOVCtts was created and all
declarations for CTTS usage changed to MOVCtts.
The actual frame_size is no longer used since commit
3d38e45eb85c7a2420cb48a9cd45625c28644b2e; and the check for
"< 0" is equivalent to the CID being valid. But this is already
checked by avpriv_dnxhd_get_interlaced() (and is actually already
ensured by mxf_dnxhd_codec_uls containing this CID).
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is just a flag per supported CID. So there is no reason to use
an avpriv function for this purpose.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids the overhead of the packet list; furthermore, using
ff_interleave_packet_per_dts() is wrong for the null muxer anyway,
because said muxer accepts packets without timestamps, which
ff_interleave_packet_per_dts() can't handle.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids branches lateron and will allow to easily avoid the overhead
of the linked list currently in use in case there is only one stream.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Besides being unused it should not be used at all:
The order of options of bitstream filters is not guaranteed
to be stable at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MXF muxers only write the header after they have received
a packet; the actual write_header function does not write anything.
So make an init function out of it.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
None of the muxers here has the AVFMT_NOSTREAMS flag set,
so it is checked generically that there are streams.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is especially important in case avio_write() would be switched
to an unsigned type like size_t, then a potential error from avio_read()
(with negative return value) would no longer be handled gracefully by
avio_write().
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The memset here is both unnecessary (avio_read() ignores the previous
content of the destination buffer) as well as nonsense (for a char
buf[BUFSIZE] sizeof(buf) and sizeof(BUFSIZE) are not the same; the
latter is sizeof(int)).
Fixes Coverity issue #1465863.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In 45bfe8b838, short_seek_threshold was removed
from the public AVIO struct. Although this option was private and not intended
to be used by public API users, it was nonetheless, because it provided functionality
that could otherwise not be gained via public API.
This was especially important for networked I/O like HTTP, where the internal
size for lavf could be way to small depending on the specifics of a user's
usecase, such as reading interlavd media files from cloud storage.
Add an AVOption to make this functionality accessible to the HTTP client.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
There is no reason to wrap them in #ifndef guards, they should only be
defined here and nowhere else. The define guards just add the
possibility to accidentally use the same FF_API name in different
libraries.
NEEDS_UNSAFE has the same value as NEEDS_FILE,
causing "duration not allowed if safe" error
while duration directive doesn't require unsafe mode.
Signed-off-by: Googleplex <yyoung2001@gmail.com>
Previously this was hardcoded to 2500000 bytes, so probing of the stream codecs
was always limited by this, and not probesize.
Also keep track of the actual size of packets in raw_packet_buffer and not the
remaining size for simplicity.
Fixes ticket #5860.
Signed-off-by: Marton Balint <cus@passwd.hu>
From ETSI EN 300 472 V1.3.1 (2003-05) Specification for conveying ITU-R System
B Teletext in DVB bitstreams:
4.1 Transport Stream (TS) packet format
The standard TS packet syntax and semantics are followed, noting the following
constraint:
- adaptation_field_control only the values "01" and "10" are permitted.
Some set top boxes (Motorola, Arris, Zyxel) refuse non-conforming packets.
Signed-off-by: Alex Shumsky <alexthreed@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Commit 6f36eb0da7 claim it fixes endless loop on
package generation if muxrate specified and copyts used. But actually it does
not work properly if -mpegts_copyts 1 is specified:
ffmpeg -y -copyts -i loewe.ts -c:v libx264 -x264opts nal-hrd=cbr:force-cfr=1 -b:v 3500k -minrate 3500k -maxrate 3500k -bufsize 1000k -c:a mp2 -f mpegts -mpegts_copyts 1 -muxrate 4500k -vframes 1000 test.ts
ffmpeg generate huge file until it reach zero-based pcr value equal to first dts.
Attached patch fixes it.
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Try to make the feature easier to use, especially since the user
have enabled -strict experimental manually. The user shouldn't
be surprised that hls_playlist is enabled for lhls automatically,
so change the log level from warning to info for that.
There is a little chance that user specified contradicted options
like -streaming 0 -ldash 1, however, it's more likely that user
didn't know or forgot to enable streaming for ldash. So enabling
streaming automatically to make the feature easier to use, similar
like enable FF_MOV_FLAG_FRAGMENT/EMPTY_MOOV/DEFAULT_BASE_MOOF and
so on for FF_MOV_FLAG_CMAF.
Fixes: integer overflow
Fixes: 40313/clusterfuzz-testcase-minimized-ffmpeg_dem_AIFF_fuzzer-4814761406103552
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If original packet is corrupted, then parsed packet is probably corrupted too.
Let the application decide what to do.
Signed-off-by: Alex Shumsky <alexthreed@gmail.com>
Such fields can be seen as generally useful in cases where the
API user is not implementing custom AVIO callbacks, but still would
like to know if data is being read or written out, such as in case
data is being read from input but no AVPacket has been received yet.
Originally added as a private entry in commit
3f75e5116b, but its grouping with
the comment noting its private state was missed during merging of
the field from Libav (most likely due to an already existing field
in between).
Looking at 3f75e5116b, the field
was supposed to be private, but during merging the field and the
group that had the comment about it got separated.
Thus, move the actual privately utilized state of this variable
into the private FFIOContext. Additionally, name the private field
somewhat better, so that it does not get confused with the amount
of bytes written out.
bit_rate is not a critical field, and we shouln't hard fail if we
can't caluclate it due to a large timebase - it needlessly breaks
valid files.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
GB/T 17975.1
Information technology-Generic coding of moving pictures and associated audio
information-Part 1:Systems
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
GB/T 17975.1
Information technology-Generic coding of moving pictures and associated audio
information-Part 1:Systems
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Passing an uninitialized variable as argument to a function is
undefined behaviour (UB). The compiler can assume that UB does not
happen.
Hence, the compiler can assume that the variables are never
uninitialized when passed as argument, which means that the codepaths
that initializes them must be taken.
In ff_seek_frame_binary, this means that the compiler can assume
that the codepaths that initialize pos_min and pos_max are taken,
which means that the conditions "if (sti->index_entries)" and
"if (index >= 0)" can be optimized out.
Current Clang git versions (upcoming Clang 14) enabled an optimization
that does this, which broke the current version of this function
(which intentionally left the variables uninitialized, but silencing
warnings about being uninitialized). See [1] for discussion on
the matter.
[1] https://reviews.llvm.org/D105169#3069555
Signed-off-by: Martin Storsjö <martin@martin.st>
Preparation for metadata changes in the following patches. Saves
having to create an extra buffer.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
High color 15-bit VQA3 video streams contain high level chunks with
only codebook updates that shouldn't be considered new frames. Now
the demuxer stores a reference to such VQFL chunks and returns them
later along with a VQFR chunk with full frame data.
correct implementation of 'cenc' encryption scheme to support
decryption of partial cipher blocks at the end of subsamples
https://www.iso.org/standard/68042.html
Signed-off-by: Nachiket Tarate <nachiket.programmer@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This gets rid of of rist_receiver_data_read, rist_receiver_data_block_free and rist_parse_address
these functions have been deprecated since librist release v0.2.1 and are replaced with functions
suffixed with 2.
I added a version macro check at the top of the file to ensure ffmpeg can still be compiled against
older versions.
Signed-off-by: Gijs Peskens <gijs@peskens.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
The maximum allowed useful PES payload data was set to PES_packet_length, but
it is in fact smaller by the length of the PES header.
This changes how corrupt streams are packetized:
- If PES header length is bigger than PES_packet_length then the PES packet
payload will be handled as an unbound packet
- PES packets with payload across multiple MPEGTS packets will always be
splitted if with the next chunk of data the payload should exceed
PES_packet_length, previously a PES_header_length amount of excess was
allowed.
Fixes ticket #9355.
Signed-off-by: Marton Balint <cus@passwd.hu>
This renames PESContext->total_size to PESContext->PES_packet_length and keeps
it 0 for unbound packets, so its name and semantics will match the standard.
There should be no change in functionality.
Signed-off-by: Marton Balint <cus@passwd.hu>
The calling code does not handle failures and will fail with assertion failures later.
Seeking can always fail even when the position was previously read.
Fixes: Assertion failure
Fixes: 35253/clusterfuzz-testcase-minimized-ffmpeg_dem_MATROSKA_fuzzer-4693059982983168
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Up until now setting the input and output devices lists is guarded
by a mutex. This prevents data races emanating from multiple concurrent
calls to avpriv_register_devices() (triggered by multiple concurrent
calls to avdevice_register_all()). Yet reading the lists pointers was
done without any lock and with nonatomic variables. This means that
there are data races in case of concurrent calls to
av_(de)muxer_iterate() and avdevice_register_all() (but only if the
iteration in av_(de)muxer_iterate exhausts the non-device (de)muxers).
This commit fixes this by putting said pointers into atomic objects.
Due to the unavailability of _Atomic the object is an atomic_uintptr,
leading to ugly casts. Switching to atomics also allowed to remove
the mutex currently used in avpriv_register_devices().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
