- Allow to add deps in any order rather than "in linking order".
- Expand deps chains as required rather than just once.
- Validate that there are no cycles.
- Validate that [after expansion] deps are limited to other fflibs.
- Remove expectation for a specific output order of unique().
Previously when adding items to <fflib>_deps, developers were
required to add them in linking order. This can be awkward and
bug-prone, especially when a list is not empty, e.g. when adding
conditional deps.
It also implicitly expected unique() to keep the last instance of
recurring items such that these lists maintain their linking order
after removing duplicate items.
This patch mainly allows to add deps in any order by keeping just
one master list in linking order, and then reordering all the
<fflib>_deps lists to align with the master list order.
This master list is LIBRARY_LIST itself, where otherwise its order
doesn't matter.
The patch also removes a limit where these deps lists were expanded
only once. This could have resulted in incomplete expanded lists,
or forcing devs to add already-deducable deps to avoid this issue.
Note: it is possible to deduce the master list order automatically
from the deps lists, but in this case it's probably not worth the
added complexity, even if minor. Maintaining one list should be OK.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
x4 - x25 faster.
check_deps() recursively enables/disables components, and its loop is
iterated nearly 6000 times. It's particularly slow in bash - currently
consuming more than 50% of configure runtime, and about 20% with other
shells.
This commit applies few local optimizations, most effective first:
- Use $1 $2 ... instead of pushvar/popvar, and same at enable_deep*
- Abort early in one notable case - empty deps, to avoid costly no-op.
- Smaller changes which do add up:
- Handle ${cfg}_checking locally instead of via enable[d]/disable
- ${cfg}_checking: test done before inprogress - x2 faster in 50%+
- one eval instead of several at the empty-deps early abort path.
- The "actual work" part is unmodified - just its surroundings.
Biggest speedups (relative and absolute) are observed with bash.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Tested-by: Helmut K. C. Tessarek <tessarek@evermeet.cx>
Tested-by: Dave Yeo <daveryeo@telus.net>
Tested-by: Reino Wijnsma <rwijnsma@xs4all.nl>
Signed-off-by: James Almer <jamrial@gmail.com>
x4 - x10 faster.
Inside print_enabled components, the filter_list case invokes sed
about 350 times to parse the same source file and extract different
info for each arg. This is never instant, and on systems where fork is
slow (notably MSYS2/Cygwin on windows) it takes many seconds.
Change it to use sed once on the source file and set env vars with the
parse results, then use these results inside the loop.
Additionally, the cases of indev_list and outdev_list are very
infrequent, but nevertheless they're faster, and arguably cleaner, with
shell parameter substitutions than with command substitutions.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Tested-by: Helmut K. C. Tessarek <tessarek@evermeet.cx>
Tested-by: Dave Yeo <daveryeo@telus.net>
Tested-by: Reino Wijnsma <rwijnsma@xs4all.nl>
Signed-off-by: James Almer <jamrial@gmail.com>
x50 - x200 faster.
Currently configure spends 50-70% of its runtime inside a single
function: flatten_extralibs[_wrapper] - which does string processing.
During its run, nearly 20K command substitutions (subshells) are used,
including its callees unique() and resolve(), which is the reason
for its lengthy run.
This commit avoids all subshells during its execution, speeding it up
by about two orders of magnitude, and reducing the overall configure
runtime by 50-70% .
resolve() is rewritten to avoid subshells, and in unique() and
flatten_extralibs() we "inline" the filter[_out] functionality.
Note that logically, "unique" functionality has more than one possible
output (depending on which of the recurring items is kept). As it
turns out, other parts expect the last recurring item to be kept
(which was the original behavior of uniqie()). This patch preservs
its output order.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Tested-by: Helmut K. C. Tessarek <tessarek@evermeet.cx>
Tested-by: Dave Yeo <daveryeo@telus.net>
Tested-by: Reino Wijnsma <rwijnsma@xs4all.nl>
Signed-off-by: James Almer <jamrial@gmail.com>
Some containers, like Matroska, may propagate key frames with no Sequence
Header OBU since it's provided in extradata instead.
With this change, the Sequence Header will be appended to the packet data
before calling aom_codec_decode().
Signed-off-by: James Almer <jamrial@gmail.com>
Also remove the superfluous aandcttables dependency from all the modules
that only need it because of mpegvideoenc
Fixes ticket #7333
Signed-off-by: James Almer <jamrial@gmail.com>
And add it to the CONFIGURABLE_COMPONENTS list in Makefile. This way, changes
to the new file will be tracked and the usual warning to suggest re-running
configure will be shown.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
aom_codec_get_global_headers() is not implemented as of libaom 1.0.0 for AV1, so
we're forced to extract the relevant header OBUs from the first packet and propagate
them as packet side data.
Signed-off-by: James Almer <jamrial@gmail.com>
Lensfun is a library that applies lens correction to an image using a
database of cameras/lenses (you provide the camera and lens models, and
it uses the corresponding database entry's parameters to apply lens
correction). It is licensed under LGPL3.
The lensfun filter utilizes the lensfun library to apply lens
correction to videos as well as images.
This filter was created out of necessity since I wanted to apply lens
correction to a video and the lenscorrection filter did not work for me.
While this filter requires little info from the user to apply lens
correction, the flaw is that lensfun is intended to be used on indvidual
images. When used on a video, the parameters such as focal length is
constant, so lens correction may fail on videos where the camera's focal
length changes (zooming in or out via zoom lens). To use this filter
correctly on videos where such parameters change, timeline editing may
be used since this filter supports it.
Note that valgrind shows a small memory leak which is not from this
filter but from the lensfun library (memory is allocated when loading
the lensfun database but it somehow isn't deallocated even during
cleanup; it is briefly created in the init function of the filter, and
destroyed before the init function returns). This may have been fixed by
the latest commit in the lensfun repository; the current latest release
of lensfun is almost 3 years ago.
Bi-Linear interpolation is used by default as lanczos interpolation
shows more artifacts in the corrected image in my tests.
The lanczos interpolation is derived from lenstool's implementation of
lanczos interpolation. Lenstool is an app within the lensfun repository
which is licensed under GPL3.
v2 of this patch fixes license notice in libavfilter/vf_lensfun.c
v3 of this patch fixes code style and dependency to gplv3 (thanks to
Paul B Mahol for pointing out the mentioned issues).
v4 of this patch fixes more code style issues that were missed in
v3.
v5 of this patch adds line breaks to some of the documentation in
doc/filters.texi (thanks to Gyan Doshi for pointing out the issue).
v6 of this patch fixes more problems (thanks to Moritz Barsnick for
pointing them out).
v7 of this patch fixes use of sqrt() (changed to sqrtf(); thanks to
Moritz Barsnick for pointing this out). Also should be rebased off of
latest master branch commits at this point.
Signed-off-by: Stephen Seo <seo.disparate@gmail.com>
This commit implements a full ATRAC9 decoder, a simple low-delay codec
developed by Sony and used in most PSVita games, some PS3 games and some
PS4 games. Its similar to AAC in that it uses Huffman coded scalefactors
but instead of vector quantization it just Huffman codes the spectral
coefficients (in a way similar to how Opus splits band energy coding
into coarse and fine precision). It opts to write rather large Huffman
codes by packing several small coefficients into one Huffman coded
symbol, though I don't believe this increases efficiency at all.
Band extension implements SBC in a simple way, first it mirrors the
lower spectrum onto the higher frequencies and then it uses one of 5
filters to shape it. Noise substitution is implemented via 2 of them.
Unlike previous ATRAC codecs, there's no QMF, this is a standard MDCT
codec.
Based off of the reverse engineering work of Alex Barney.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
opencl_vaapi_intel_media doesn't depend on libmfx, OpenCL™ Drivers
and Runtimes for Intel® Architectureis is a standalone release, more
information can be found in the link:
https://software.intel.com/en-us/articles/opencl-drivers.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
This filter does HDR(HDR10/HLG) to SDR conversion with tone-mapping.
An example command to use this filter with vaapi codecs:
FFMPEG -init_hw_device vaapi=va:/dev/dri/renderD128 -init_hw_device \
opencl=ocl@va -hwaccel vaapi -hwaccel_device va -hwaccel_output_format \
vaapi -i INPUT -filter_hw_device ocl -filter_complex \
'[0:v]hwmap,tonemap_opencl=t=bt2020:tonemap=linear:format=p010[x1]; \
[x1]hwmap=derive_device=vaapi:reverse=1' -c:v hevc_vaapi -profile 2 OUTPUT
Signed-off-by: Ruiling Song <ruiling.song@intel.com>
The FATE tests for MSVC versions older than 2013 are untested in FATE
and apparently are no longer supported.
This commit makes the configure process error out in case an older version
is used, and suggests to use a supported version of MSVC to compile.
This also changes the documentation to reflect this.
As discussed on IRC:
2018-05-12 19:45:16 jamrial then again, most of those were for old msvc, and i think we're not supporting versions older than 2013 (first one c99 compliant) anymore
2018-05-12 19:45:43 +JEEB yea, I think 2013 update 2 is needed
22:53 <@atomnuker> nevcairiel: which commit broke/unsupported support for msvc 2013?
23:23 <@atomnuker> okay, it was JEEB
23:25 <+JEEB> which was for 2012 and older
23:25 <+JEEB> and IIRC we no longer test those in FATE so that was my assumption
23:26 <+JEEB> 2013 is when MS got trolled enough to actually update their C part
23:26 <+JEEB> aand actually advertised FFmpeg support
23:26 <+JEEB> (although it was semi-failing until VS2013 update 1 or 2)
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This does require libmysofa with today's latest commit (08f243d1ec).
They already had a pkg-config file, but the dependencies weren't setup right. Until now.
This should be included as `<lilv/lilv.h>`, same as is done in af_lv2.c.
Forcing the extra lilv-0 breaks platforms where the include dir is
`/usr/include/lilv/lilv.h` rather than
`/usr/include/lilv-0/lilv/lilv.h`.
The new include path works for both, because the `pkg-config --cflags`
includes `-I/usr/include/lilv-0`.
It exists, so why not use it? Helps one get rid of additional
search path related flags in addition to PKG_CONFIG_{PATH,LIBDIR}
when utilizing a cross-prefix separate from the sysroot.
This can "demux" .vpy files. Autodetection of .vpy scripts is
intentionally not done, because it would be a major security issue. You
need to force the format, for example with "-f vapoursynth" for the
FFmpeg CLI tools.
Some minor code copied from other LGPL parts of FFmpeg.
I did not find a good way to test a few of the more obscure VS features,
like VFR nodes, compat pixel formats, or nodes with dynamic size/format
changes. These can be easily implemented on demand.
