This fixes segfault caused by 3d3cf6745e
when SingleChannelElement.ret was renamed to SingleChannelElement.ret_buf.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Dropping frames is undesirable but that is the only way by which the
decoder could return to low delay mode. Instead emit a warning and
continue with delayed frames.
Fixes a crash in fuzzed sample nasa-8s2.ts_s20033 caused by a larger
than expected has_b_frames value. Low delay keeps getting re-enabled
from a presumely broken SPS.
CC: libav-stable@libav.org
The qpel functions referenced here are not related to h264 and should
thus never have been under CONFIG_H264QPEL.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The only CPUs that have 3dnow and don't have mmxext are 12 years old.
Moreover, AMD has dropped 3dnow extensions from newer CPUs.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The vertical offset mask 0x07 is suspicious.
v_off = FFMIN(data[2] & 0x07, CDG_BORDER_HEIGHT - 1);
Note that v_off is up to 11 (CDG_BORDER_HEIGHT - 1), the correct mask
should be 0x0F.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The sample count is decremented by the DECODE() macro and needs to be reset
in each loop iteration. Also, DECODE() increments the src pointer so that does
not need to be done separately.
s->mb_x is reset to zero a couple of lines above. It does not make
sense to call ff_er_add_slice() with 0 as endx when the end of the
macroblock row was reached. Fixes unnecessary and counterproductive
error resilience in https://bugzilla.libav.org/show_bug.cgi?id=394.
CC: libav-stable@libav.org
The third argument of OP_U8_ALTIVEC is evaluated at most once so
there is no need for a potentially unused temporary variable.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The alternative to zeroing on init is setting the corrupted flag in
all cases where pal_pic is not fully written, at the cost of added
complexity.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
This fixes use of uninitialized values when the FLAC encoder uses the
2-level, 4-level, and 8-level search methods. Fixes failure of the
fate-flac-24-comp-8 test when run using valgrind.
This allows getting rid of redundant checks later in the codec
specific init functions.
Move the check to before actually initializing the decoder lib,
to simplify error handling.
This fixes a case of returning a value from a void function, present since
d40dab907.
Signed-off-by: Martin Storsjö <martin@martin.st>
Ensures the decoder did not set channel count to an insanely high value
during initialization, which could cause large memory usage when it tries to
get a buffer during decoding.
After a flush, don't average the output envelope and energy with
previous iterations.
Also start directly from the target values for the first iteration
at startup.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was a leftover from previous iterations of the code, where the
refl coef arrays were statically allocated.
Signed-off-by: Martin Storsjö <martin@martin.st>
Replace INIT_AVX by INIT_XMM avx. Port the whole file to use cpuflag
based function declarations. Remove (now unused) cputype argument in
function declaration macros. Change function prototypes to have mmx2
instead of mmxext as suffix, since that's required by cpuflags.
This isn't too useful as a normal codec, but can be used in
voip style applications. The decoder updates the noise
generator parameters when a packet is given to it for decoding,
but if called with an empty packet, it generates more noise
according to the last parameters.
Signed-off-by: Martin Storsjö <martin@martin.st>
Subtracting a (positive) value from the address of an array violates
C99 section 6.5.6:
If both the pointer operand and the result point to elements of the
same array object, or one past the last element of the array object,
the evaluation shall not produce an overflow; otherwise, the
behavior is undefined.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Subtracting a (positive) value from the address of an array violates
C99 section 6.5.6:
If both the pointer operand and the result point to elements of the
same array object, or one past the last element of the array object,
the evaluation shall not produce an overflow; otherwise, the
behavior is undefined.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Avoids memleaks with audio when extended_data is nontrivial and the user
doesn't reset the frame.
Shouldn't have any effect for video for now, but might be useful in the
future.
This defines an AVCodec only if the corresponding CONFIG option is
enabled instead of using the broad CONFIG_ENCODERS/DECODERS.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Since it is declared as a string AVOption, the generic freeing code
attempts to free it on codec close. Some codecs might have already freed
it elsewhere (or didn't even allocate it with av_malloc() in the first
place), so this might lead to an invalid free.
There is no point in having this field accessible as an AVOption, so
remove it from the options table.
Fixes Bug 380.
CC: libav-stable@libav.org
Error out on init if a codec with CODEC_CAP_EXPERIMENTAL is requested
and strict_std_compliance is not FF_COMPLIANCE_EXPERIMENTAL.
Move the check from avconv to avcodec_open2() and return
AVERROR_EXPERIMENTAL accordingly.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Earlier versions of for instance of libavcodec expect this symbol to be
present in libavutil. This commit can be reverted after the next major
bump.
New shared builds of avcodec will link to the internal copy of the
table within that library, so those builds won't rely on this table
being present in avutil any longer either.
Signed-off-by: Martin Storsjö <martin@martin.st>
The loops were reading ahead one line, which could end up outside the
buffer for reference blocks at the edge of the picture. Removing
this readahead has no measurable performance impact.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Internally chroma planes have multiple of four height while allocated image
planes might be smaller if CODEC_FLAG_EMU_EDGE is set. Thus we should not
output more lines of chroma than frame can accept.
Also the decoder can be safely switched to direct rendering now.
aac_tablegen.h includes aac.h for the POW_SF2_ZERO definition, but
this also pulls in a raft of other headers, some of which are not
safe to use in code built with the host compiler.
Moving POW_SF2_ZERO to aac_tablegen_decl.h, where the declaration
of the array it relates to already resides, fixes the problems.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This requires the makedef perl script by Derek, from the
c89-to-c99 repo. That scripts produces a .def file, listing
the symbols to be exported, based on the gcc version scripts
and the built object files.
To properly load non-function symbols from DLL files, the
data symbol declarations need to have the attribute
__declspec(dllimport) when building the calling code. (On mingw,
the linker can fix this up automatically, which is why it has not
been an issue so far. If this attribute is omitted, linking
actually succeeds, but reads from the table will not produce the
desired results at runtime.)
MSVC seems to manage to link DLLs (and run properly) even if
this attribute is present while building the library itself
(which normally isn't recommended) - other object files in the
same library manage to link to the symbol (with a small warning
at link time, like "warning LNK4049: locally defined symbol
_avpriv_mpa_bitrate_tab imported" - it doesn't seem to be possible
to squelch this warning), and the definition of the tables
themselves produce a warning that can be squelched ("warning C4273:
'avpriv_mpa_bitrate_tab' : inconsistent dll linkage, see previous
definition of 'avpriv_mpa_bitrate_tab').
In this setup, mingw isn't able to link object files that refer to
data symbols with __declspec(dllimport) without those symbols
actually being linked via a DLL (linking avcodec.dll ends up with
errors like "undefined reference to `__imp__avpriv_mpa_freq_tab'").
The dllimport declspec isn't needed at all in mingw, so we simply
choose not to declare it for other compilers than MSVC that requires
it. (If ICL support later requires it, the condition can be extended
later to include both of them.)
This also implies that code that is built to link to a certain
library as a DLL can't link to the same library as a static library.
Therefore, we only allow building either static or shared but not
both at the same time. (That is, static libraries as such can be,
and actually are, built - this is used for linking the test tools to
internal symbols in the libraries - but e.g. libavformat built to
link to libavcodec as a DLL cannot link statically to libavcodec.)
Also, linking to DLLs is slightly different from linking to shared
libraries on other platforms. DLLs use a thing called import
libraries, which is basically a stub library allowing the linker
to know which symbols exist in the DLL and what name the DLL will
have at runtime.
In mingw/gcc, the import library is usually named libfoo.dll.a,
which goes next to a static library named libfoo.a. This allows
gcc to pick the dynamic one, if available, from the normal -lfoo
switches, just as it does for libfoo.a vs libfoo.so on Unix. On
MSVC however, you need to literally specify the name of the import
library instead of the static library.
Signed-off-by: Martin Storsjö <martin@martin.st>
