When the display matrix is not the identity one, but the rotation angle
is zero, there is no need to update the sample aspect ratio.
Otherwise, it is possible to obtain negative values which interferes
with transcoding in later stages. This kind of behaviour is reproducible
on mov files with "major_brand: MSNV".
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
AVInputFormat.read_close is not called if AVInputFormat.read_header
fails, so this needs to be handled separately.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '51da7d02748cc54b7d009115e76efa940b99a8ef':
matroskaenc: refuse to write AAC without valid extradata
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A failure in segment_end() or segment_start() would lead to freeing
a dangling pointer and in general further calls to seg_write_packet()
or to seg_write_trailer() would have the same faulty behaviour.
CC: libav-stable@libav.org
Reported-By: luodalongde@gmail.com
I think this turned out pretty terrible. There's no good way to add new
custom tags that write to AVFormatContext->metadata.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The previous code assumed if an atom was marked with a 64-bit
size extension, it actually had that data available. The new
code verfies there's enough data in the atom for this to be
done.
Failure to verify causes total_size > atom.size which will
result in negative size calculations later on.
Found-by: Paul Mehta <paul@paulmehta.com>
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Under abnormal conditions the item_count may exceed the max
allocation size on 32-bit systems, this causes the allocated
size to overflow and become too small for the given count.
Additionally, if av_reallocp() fails its allocation, the
fragment_index_count is not correctly decremented.
Ensuring further havoc may be wrought, the error code for
read_tfra() is not checked upon return.
Found-by: Paul Mehta <paul@paulmehta.com>
positive return code and use of _array functions by commiter
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ID3v1 fields have a fixed size, and they are padded either with zeros,
or with spaces. Handle the latter case, instead of putting strings with
trailing spaces into the AVDictionary.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '46808fdf04ab113df374157b90b506eb3110daf2':
movenc: Enable editlists by default if delay_moov is enabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This comment can be traced back to the initial commit from 2001,
and it seemed to be misleading/incorect already back then. (It
was used for normal, non-raw file formats already then.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b3b0b35db2f3b61bf2f0f4fa85f5b6267d83c8fe':
movenc: Get rid of a hack for updating the dvc1 atom
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '847bf5988fec1d3e65c1d8cf0cdb8caf0cfd0c1b':
movenc: Add an option for delaying writing the moov with empty_moov
Conflicts:
libavformat/movenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c725faebda9a516766d94c33b07972ab0f70cf93':
movenc: Use start_dts/cts instead of cluster[0] for writing edit lists
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '724cbea7193945fe5a5b4dea8ede344803572844':
movenc: Remove an unnecessary condition when flushing fragments
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '355d01a1bf55297b1d1f04e4bfbf0ddc93b6247e':
movenc: Factorize writing ftyp and other identification tags to a separate function
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This should be more correct. This also should give more sensible
switching between video streams with different amount of b-frame
delay.
The current dash.js release (1.2.0) fails to start playback of
such files from the start (if the start pts is > 0), but this has
been fixed in the current git version of dash.js.
Also enable the use of edit lists, so that streams in many cases
start at pts=0.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the more generic approach with the delay_moov flag, instead of
having a update mechanism specific to this one single atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
This delays writing the moov until the first fragment is written,
or can be flushed by the caller explicitly when wanted. If the first
sample in all streams is available at this point, we can write
a proper editlist at this point, allowing streams to start at
something else than dts=0. For AC3 and DNXHD, a packet is
needed in order to write the moov header properly.
This isn't added to the normal behaviour for empty_moov, since
the behaviour that ftyp+moov is written during avformat_write_header
would be changed. Callers that split the output stream into header+segments
(either by flushing manually, with the custom_frag flag set, or by
just differentiating between data written during avformat_write_header
and the rest) will need to be adjusted to take this option into use.
For handling streams that start at something else than dts=0, an
alternative would be to use different kinds of heuristics for
guessing the start dts (using AVCodecContext delay or has_b_frames
together with the frame rate), but this is not reliable and doesn't
necessarily work well with stream copy, and wouldn't work for getting
the right initialization data for AC3 or DNXHD either.
Signed-off-by: Martin Storsjö <martin@martin.st>
If fragments == 0 it means we haven't written any moov atom yet.
If the empty_moov flag is set, we already have written an empty moov
atom at startup. Thus, the check for empty_moov is redundant.
This is in preparation for allowing writing the moov atom later,
even when using the empty moov flag.
Signed-off-by: Martin Storsjö <martin@martin.st>
Such data streams (which then contain no other packets except the faulty one)
confuse some user applications, like VLC
Works around vlcticket 12389
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b91a5757fcbf723da99b05b298a6f820271dbc2b':
dashenc: Fix writing of timelines that don't start at t=0
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When writing an explicit time, reset the cur_time variable to this
value as well. This avoids writing excessive time attributes for each
segment in the timeline, as long as the segments are continuous.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes Ticket3514
See: ETSI EN 300 743 V1.3.1 (2006-11)
"In summary, all of the segments of a single display set shall be carried in one (or more) PES packets that have the same
PTS value."
with PTS = DTS and remuxing of such a stream it is to be expected that sometimes
multiple packets would have the same DTS
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allows expansion of the filename template with strftime() with the option
-strftime 1 (disabled by default). This allows segments to be named by time of
creation, adding some flexibility.
Fixes Ticket 4104 (add strftime to segment muxer)
Signed-off-by: Pedro E. M. Brito <pedroembrito@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In case of errors the cache file will be slightly larger than needed,
this should have no practical relevance though
Should fix build on VS201*
Found-by: jamrial
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This improves readability and makes it clear that the freed
value is not used after the end of an iteration
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9cfa68c560bdec82d2d5ec079f9c5b0f9ca37af0':
mpegts: add support for Opus
Conflicts:
libavcodec/opus_parser.c
libavformat/mpegts.c
See: 74141f693d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8ebf02f8f530240edf7e45f35f7647ef9dd44a58':
libavformat: Only use MoveFileExA when targeting the desktop API subset
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fc308b30bb24e623fed042ec78b10803b2362a18':
rtpenc_mpegts: Call write_trailer for the mpegts muxer even if no output buffer exists
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e2ce16392205d8efe9143329ed3fb5fcb15498fa':
mpegts: Support running the write_trailer function without an AVIOContext
Merged-by: Michael Niedermayer <michaelni@gmx.at>
use av_get_codec_tag_string() in wav_read_header() for printing the
faulty start code from riff header
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Make it more readable and display an error message in case an invalid
header is detected (the current version just returns
AVERROR_INVALIDDATA)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The MoveFileExA is available in the headers regardless which API
subset is targeted, but it is missing in the Windows Phone link
libraries. When targeting Windows Store apps, the function is
available both in the headers and in the link libraries, and thus
there is no indication for the build system that this function
should be avoided - such an indication is only given by the
Windows App Certification Kit, which forbids using the MoveFileExA
function.
Therefore check the WINAPI_FAMILY defines instead, to figure out
which API subset is targeted.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since the mpegts muxer now can handle being called with a NULL
AVIOContext, we don't need to try to allocate one before calling
write_trailer.
Signed-off-by: Martin Storsjö <martin@martin.st>
If opening and closing dynamic buffers as AVIOContext, we may
not have any AVIOContext available when wanting to close and
deallocate the muxer. Allow calling write_trailer despite this.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '59f0275dd0a42a7f90271a83a78e9ca5e69ff5b0':
movenc: Adjust the pts of new fragments similarly to what is done for dts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The pts and the corresponding duration is written in sidx
atoms, thus make sure these match up correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since this structurally is quite different from normal RTP
(multiple streams are muxed into one single mpegts stream,
which is packetized into one single RTP session), it is kept
as a separate muxer.
Since this structurally also behaves differently than normal
RTP, all of the other muxers that do chained RTP muxing
(rtsp, sap, mp4) would need to be updated similarly to handle
this - in particular, creating one single rtp_mpegts muxer
for the whole presentation instead of one rtp muxer per stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
The packetizer only supports splitting at GOB headers - if
such aren't available frequently enough, it splits at any
random byte offset (not at a macroblock boundary either, which
would be allowed by the spec) and sends a payload header pretend
that it starts with a GOB header.
As long as a receiver doesn't try to handle such cases cleverly
but just drops broken frames, this shouldn't matter too much
in practice.
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead explicitly jump to the default case in the cases where
it is wanted, and avoid fallthrough between different codecs,
which could easily introduce bugs if people editing the code
aren't careful.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'df07c07b3de0a5e8890078944de1eb5cb8372ef8':
rtpdec_h263_rfc2190: Clear the stored bits if discarding buffered data
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '01f251c44d83eedc819625d2caac9ff9697a085d':
rtpenc: Set the timestamp properly when sending mpegts data, too
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If we throw away the buffered incomplete frame, make sure to also
throw away the buffered bits of an incomplete byte at the same
time.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In particular, when packetizing mpegts into rtp, the input packet
timestamp may come from more than one stream, which could cause
multiple packets be written with the same timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '456e93bfdd4cbc5e995dea415019abd0703d0e16':
dashenc: Adjust the start time of a segment to the end of the previous segment
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f628d5943c12389c07d652d23d3916997f9f0f6':
dashenc: Write segment timelines properly if the timeline has gaps
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is the same adjustment that the mp4 muxer does to the start
timestamp of fragments, since the timestamp of a sample in an mp4
file is implicit from the sum of earlier sample durations.
This avoids gaps in the timeline (which can stop dash.js from
playing it back), and makes sure the timestamp on the segmenter
level matches what the mp4 muxer actually writes into the segments.
This is only an issue if the AVPacket duration of the last
packet of a segment doesn't point to the actual start timestamp
of the next packet (the first in the next segment).
Signed-off-by: Martin Storsjö <martin@martin.st>
Write a new start time if the duration of the previous segment
didn't match the start of the next one. Check that segments
actually are continuous before writing a repeat count.
This makes sure timestamps deduced from the timeline actually
match the real start timestamp as written in filenames (if
using a template containing $Time$).
Signed-off-by: Martin Storsjö <martin@martin.st>
Close segment I/O context and append segment in hls_write_trailer() only
when segment I/O context is allocated.
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Since 3cec81f4d4, a zero-length metadata value would try to
allocate 2*0 bytes, where av_malloc() returns NULL.
Always add one to the allocated length, to allow space for
a null terminator in the zero-length case.
Incidentally, this fixes fate-alac on RVCT 4.0, where a compiler
bug seems to mess up the mov muxer to the point that it writes
the wrong sort of metadata. Previously this bug was undetected,
but since 3cec81f4d4 such mov files started returning
AVERROR(ENOMEM) in the mov demuxer.
Signed-off-by: Martin Storsjö <martin@martin.st>
In matroska_read_seek(), |tracks| is assigned at the begining of the
function. However, functions like matroska_parse_cues() could reallocate
the tracks and invalidate |tracks|.
This assigns |tracks| only before using it, so that it will not get
invalidated elsewhere.
Bug-Id: chromium/427266
This is primarly to maintain current behavior when r_frame_rate is set for muxers
and could be reverted if it has some advantage
Fixes Ticket3629 part1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This was suggested by cbsrobot, ubitux and koda
There are files with huge amounts of XMP data, which would otherwise
be displayed in the terminal output of FFmpeg
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e737a4aaafcb1d761b7f96043c2f83ce742c64ae':
dashenc: Change the duration fields to 64 bit
Conflicts:
libavformat/dashenc.c
See: e65849a70b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This option flag deletes segment files removed from the playlist after a
period of time equal to the duration of the segment plus the duration of
the playlist.
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For the last_duration field, it's mostly theoretical, but the
total_duration field more probably may need to actually be 64 bit.
Bug-Id: CID 1254944
Signed-off-by: Martin Storsjö <martin@martin.st>
As the manifest/segments are flushed to disk, log to stderr the
progress, when in verbose logging mode
Signed-off-by: Martin Storsjö <martin@martin.st>
Only the upper 2 bits of the first byte are known to be
a fixed value.
The lower bits in the first byte of a RTP packet could be set
if the input is from another RTP packetizers than libavformat's,
but for RTCP packets, they would also be set when sending RTCP RR
packets, triggering false warnings about incorrect input format
to the protocol.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'fccfc22d1f304aef42a0b960e4c1d55ce67107f5':
libavformat: Build hevc.o when building the RTP muxer
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The RTP muxer enables the actual codepaths within sdp.c,
which depend on hevc.o since e5cfc8fd.
This fixes builds with --disable-everything --enable-muxer=rtp.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '3c01039e0bc7d269900e15551f8171c4328a0223':
mov: further expand the list of parsed metadata tags
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b704b648f9ecb830874627db958a37e004107d1b':
mov: parse XMP metadata on demand
Conflicts:
libavformat/isom.h
libavformat/version.h
See: 054c506e3d
The default is left unchanged at enabled
We can change the default if people prefer but i do not want to do that
in a merge.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '35384934d6e27e0334060a23a0c83a3cb5cef198':
mov: cosmetics: reorder the list of tags
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The Extensible Metadata Platform tag can contain various kind of data
which are not strictly related to the video file, such as history of edits
and saves from the project file. So display XMP metadata only when the
user explicitly requires it.
Based on a patch by Marek Fort <marek.fort@chyronhego.com>.
These tags describe the product and quicktime library version respectively.
They originate from Adobe Premiere, but also some other programs use them.
Contrary to other tags, they contain 'raw' data which is not to be
interpreted as iso639 or mac strings.
Based on a patch by Peter Ross <pross@xvid.org>.
This uses the RIFF header stored size to figure out the expected AVI
file size, instead of the actual file. To work fully it requires handling
failed avio_seek() instead of assuming they always succeed.
Some fate file has been cut off and contains half a frame at the end which
previously was not output during demuxing. This frame is now output to
encoder, thus the fate diff update.
Bug-Id: 261
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
