This should be reused for a generic simple_idct10 function.
Requires a bit of trickery to declare common constants in C.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Bare ampersand characters are still accepted, even though out-of-spec.
Also fixes adjacent tags not being parsed.
Fixes trac #4915
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
This commit adds the ability for a profile to set the default
options, as well as for the user to override such options
by simply stating them in the command line while still keeping
the same profile, as long as those options are still permitted by
the profile.
Example: setting the profile to aac_low (the default) will turn
PNS and IS on. They can be disabled by -aac_pns 0 and -aac_is 0,
respectively. Turning on -aac_pred 1 will cause the profile to be
elevated to aac_main, as long as no options forbidding aac_main
have been entered (like AAC-LTP, which will be pushed soon).
A useful feature is that by setting the profile to mpeg2_aac_low,
all MPEG4 features will be disabled and if the user tries to enable
them then the program will exit with an error. This profile is
signalled with the same bitstream as aac_low (MPEG4) but some devices
and decoders will fail if any MPEG4 features have been enabled.
This commit implements support for 7.1 channel audio. There's no
more predefined bitstream channel mappings so going beyond 8 channels
(and 7 channels exactly) will require programmable channel elements,
which is already underway.
The bulk of calls to quantize_band_cost are replaced
by a call to a version that memoizes, greatly improving
performance, since during coefficient search there is
a great deal of repeat work.
Memoization cannot always be applied, so do this in a
different function, and leave the original as-is.
Intermediate results can indeed violate SF delta. Instead of asserting
there, just make the code safe, and assert on the final result.
Also re-clamp SFs more often in short windows (which tend to violate
the restriction when encoding the switch from one window to the other)
It was merged with the iff_ilbm decoder in commit
929a24efff.
Define AV_CODEC_ID_IFF_BYTERUN1 as AV_CODEC_ID_IFF_ILBM for API
compatibility.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This finalizes merging of the work in the patches in ticket #2686.
Improvements to twoloop and RC logic are extensive.
The non-exhaustive list of twoloop improvments includes:
- Tweaks to distortion limits on the RD optimization phase of twoloop
- Deeper search in twoloop
- PNS information marking to let twoloop decide when to use it
(turned out having the decision made separately wasn't working)
- Tonal band detection and priorization
- Better band energy conservation rules
- Strict hole avoidance
For rate control:
- Use psymodel's bit allocation to allow proper use of the bit
reservoir. Don't work against the bit reservoir by moving lambda
in the opposite direction when psymodel decides to allocate more/less
bits to a frame.
- Retry the encode if the effective rate lies outside a reasonable
margin of psymodel's allocation or the selected ABR.
- Log average lambda at the end. Useful info for everyone, but especially
for tuning of the various encoder constants that relate to lambda
feedback.
Psy:
- Do not apply lowpass with a FIR filter, instead just let the coder
zero bands above the cutoff. The FIR filter induces group delay,
and while zeroing bands causes ripple, it's lost in the quantization
noise.
- Experimental VBR bit allocation code
- Tweak automatic lowpass filter threshold to maximize audio bandwidth
at all bitrates while still providing acceptable, stable quality.
I/S:
- Phase decision fixes. Unrelated to #2686, but the bugs only surfaced
when the merge was finalized. Measure I/S band energy accounting for
phase, and prevent I/S and M/S from being applied both.
PNS:
- Avoid marking short bands with PNS when they're part of a window
group in which there's a large variation of energy from one window
to the next. PNS can't preserve those and the effect is extremely
noticeable.
M/S:
- Implement BMLD protection similar to the specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Since M/S decision
doesn't conform to section 6.1, a different method had to be
implemented, but should provide equivalent protection.
- Move the decision logic closer to the method specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Specifically,
make sure M/S needs less bits than dual stereo.
- Don't apply M/S in bands that are using I/S
Now, this of course needed adjustments in the compare targets and
fuzz factors of the AAC encoder's fate tests, but if wondering why
the targets go up (more distortion), consider the previous coder
was using too many bits on LF content (far more than required by
psy), and thus those signals will now be more distorted, not less.
The extra distortion isn't audible though, I carried extensive
ABX testing to make sure.
A very similar patch was also extensively tested by Kamendo2 in
the context of #2686.
This should fix the undefined behavior reported in:
https://trac.ffmpeg.org/ticket/4727.
I can reproduce this at runtime: simply stick in an abort call in
asym_quant to check if c < 0 and run FATE. I don't know ac3 so I can't
confirm if negative coefficients are intentional, but at the moment they
clearly are according to FATE.
This resolves the undefined behavior. Tested with FATE.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
the pps offset is used to locate pps in the spspps_buf; however, the
current calc method is wrong because it is the offset of the original
avctx->extradata;
when there is only one sps in the avcc; the value is correct by
coincidence, however, it will fail in avcc with multi sps
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes a warning observed on Clang 3.7:
"warning: attribute 'deprecated' is ignored, place it after "struct" to apply attribute to type declaration [-Wignored-attributes]"
and thus enables deprecation warning for the relevant struct.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This should fix the first undefined behavior reported in:
https://trac.ffmpeg.org/ticket/4727.
I can't reproduce the runtime behavior reported in the ticket, hence I
can't confirm that this actually fixes the exact issue reported in the
ticket.
Regardless, I can confirm that this is a genuine issue, and that
negative shifts can (and do) occur, fixed by this.
Tested with FATE.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There is not much reason to generate such a small table at runtime.
Signed-off-by: Derek Buitenhuis <derekb@vimeo.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The MBAFF handling recently introduced on the decoder side shows that
the encoder does not support it correctly. Therefore, make the related
profile experimental.
Furthermore, current encoder logic treats it as unable to encode as
progressive, which isn't the case.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
MBAFF-like handling of interlaced content in CID 1260 is different from
the other CIDs, and in particular doesn't use the same syntax.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Profiles 1256 & 1270 (currently) signal at the frame header and MB
levels the colorspace used, either RGB or YUV. While a MB-level
varying colorspace is not supported, whether it is constant can be
tracked so as to determine the exact colorspace.
This requires having bitdepth and the ACT and 4:4:4 flags, in turn
needing the CID. Because setting those before having validated
enough things may result in invalid/unset DSP fucntions, setting
the bitdepth in the context is delayed.
It is not tested against a true RGB sequence, though.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
place primary audio coding header data into DCAAudioHeader
structure to make DCAContext clearer
and move channel related data to DCAChan structure to make
them easier to use by extensions
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Do not fail when original resolution is smaller than current one,
as the frame buffer is resized automatically.
Signed-off-by: Vittorio Giovara <vittorio.giovara at gmail.com>
Modified datatype of function argument (pitch from int32_t to ptrdiff_t)
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Modified sps and pps access from old HEVCContext(s) structure to newly introduced HEVCParamSets(ps)
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
