This is intended to avoid -Wformat= warnings on systems
where %s might not be supported (and also generally emitted
by GCC with -pedantic).
Reviewed-by: Liu Steven <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is undefined behaviour to use a different type for a call
than the actual type of the function.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This separates the URL-layer adjacent parts of the code
from the parts that are also usable with custom IO.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible because the lifetime of both coincide.
Besides reducing the number of allocations this also simplifies
access to QSVFramesContext as one no longer has to
go through AVHWFramesInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible because the lifetime of both coincide.
Besides reducing the number of allocations this also simplifies
access to QSVDeviceContext as one no longer has to
go through AVHWDeviceInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible because the lifetime of both coincide.
Besides reducing the number of allocations this also simplifies
access to D3D11VAFramesContext as one no longer has to
go through AVHWFramesInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible because the lifetime of both coincide.
Besides reducing the number of allocations this also simplifies
access to DXVA2FramesContext as one no longer has to
go through AVHWFramesInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Some encoders, like flac, propagate updated extradata at the end of encoding
as packet side data. Use it to update the relevant codec_config.
Signed-off-by: James Almer <jamrial@gmail.com>
If it's the primary item, then it's expected to be ready for presentation even
outside of the grid it belongs to.
Signed-off-by: James Almer <jamrial@gmail.com>
Doxygen only associates this comment with "pts_correction_num_faulty_pts",
causing it to display incorrectly.
Signed-off-by: Andrew Sayers <ffmpeg-devel@pileofstuff.org>
Doxygen eats the newline in the first comment, making it harder to read.
Join the lines and add a comma, so source and documentation are equally readable.
Doxygen only associates the second comment with cust_dec.
The comments for cust_dec and cust_tab make perfect sense without it,
so downgrade it to a non-doxygen "//" comment.
The third comment was missed by the command in the previous commit,
because it (correctly but uniquely) doesn't have a trailing comma.
Signed-off-by: Andrew Sayers <ffmpeg-devel@pileofstuff.org>
Use AVHWFramesContext.hwctx instead.
This simplifies access to VDPAUFramesContext as one no longer has
to go through AVHWFramesInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible because the lifetime of both coincide.
Besides reducing the number of allocations this also simplifies
access to VDPAUDeviceContext as one no longer has to
go through AVHWDeviceInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
libavcodec/vvc/vvc_inter.c:823:18: runtime error: signed integer overflow: 1426128896 + 1426128896 cannot be represented in type 'int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior libavcodec/vvc/vvc_inter.c:823:18
Suggested-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The following cases should set bs to 1:
If the prediction modes are not the same.
If both prediction modes are MODE_IBC, but the motion vector delta is larger than 8 of 1/16 pixels.
see 8.8.3.5
How to reproduce it:
vvencapp -i sintel_trailer_2k_1080p24.y4m --preset fast --additional "IBC=1" -o sintel.266
ffmpeg -i sintel.266 -f md5 -
md5 will mismatch
Found-by: 6ws at https://github.com/ffvvc/FFmpeg/issues/187#issuecomment-1962842135
Frame-level side data attributes are printed with the same key/value
structure as packet-level side data attributes, but this is not
reflected in the XSD.
It is only used by ffprobe (once) and ffplay (twice);
inlining it avoids including it unnecessarily into ffmpeg.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Rebased on top of recently merged fixes (should apply correctly now).
In merged DVD patch, -pgc and -pg options were broken. While these are
rather advanced options, they are the only means to get content for
some strangely authored discs.
Signed-off-by: Marth64 <marth64@proxyid.net>
This makes the code much simpler (especially for adding support
for other instruction set extensions), avoids needing inline
assembly for this feature, and generally is more of the canonical
way to do this.
The CPU feature detection was added in
493fcde50a, using HWCAP_CPUID.
The argument for using that, was that HWCAP_CPUID was added much
earlier in the kernel (in Linux v4.11), while the HWCAP flags for
individual features always come later. This allows detecting support
for new CPU extensions before the kernel exposes information about
them via hwcap flags.
However in practice, there's probably quite little advantage in this.
E.g. HWCAP2_I8MM was added in Linux v5.10 - long after HWCAP_CPUID,
but there's probably very little practical cases where one would
run a kernel older than that on a CPU that supports those instructions.
Additionally, we provide our own definitions of the flag values to
check (as they are fixed constants anyway), with names not conflicting
with the ones from system headers. This reduces the number of ifdefs
needed, and allows detecting those features even if building with
userland headers that are lacking the definitions of those flags.
Also, slightly older versions of QEMU, e.g. 6.2 in Ubuntu 22.04,
do expose support for these features via HWCAP flags, but the
emulated cpuid registers are missing the bits for exposing e.g. I8MM.
(This issue is fixed in later versions of QEMU though.)
Signed-off-by: Martin Storsjö <martin@martin.st>
This will allow to make aac_defines.h decoder-only.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
And move compute_ref_coefs() to its only user: lpc.c
There is no overlap between the users of compute_lpc_coefs()
and lpc proper.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It leads to defines for the AAC decoder being included
outside of the AAC decoder.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The mpegts code historically tries to strip (the first) metadata access unit
header from synchronous KLV metadata, but the detection for such streams was
unreliable causing strips of asynchronous metadata or ID3 as well.
MISB ST 1402 specifies required stream type, stream id and registration
descriptor (which eventually maps to the codec ID) so let's use all of these
for reliable detection.
Fixes a regression caused by 468615f204.
Fixes ticket #10828, #10883.
Signed-off-by: Marton Balint <cus@passwd.hu>
This is possible because the lifetime of both coincide.
Besides reducing the number of allocations this also simplifies
access to OpenCLFramesContext as one no longer has to
go through AVHWFramesInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible because the lifetime of both coincide.
Besides reducing the number of allocations this also simplifies
access to OpenCLDeviceContext as one no longer has to
go through AVHWDeviceInternal.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To do so, concatenate all the names together to one big string
name1\0name2\0....lastname\0\0. This avoids the pointer in
the FunctionLoadInfo structure and thereby moves vk_load_info
into .rodata (and makes it smaller by 888B).
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Saves 16B per entry here (four of these 16 bytes are padding);
leads to 1776 B of savings in each file that uses
ff_vk_load_functions().
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are three possible names for the functions requested;
they only differ in an extension: "", "EXT" or "KHR".
Yet vk_load_info contained pointers to all these strings.
This is wasteful and this commit changes it to avoid
the latter two strings. This saves 6353B of strings,
1776 B of .data.rel.ro as well as 5328 B due to the removed
relocations (corresponding to 2 * 111 removed pointers)
in lavc/vulkan_decode.o alone (ff_vk_load_functions()
is inlined in lavfi/vulkan_filter.c, lavu/hwcontext_vulkan.c
and lavc_vulkan_decode.c, so the savings are three times
this for shared builds; for static builds, the number may
be smaller depending upon whether strings are deduplicated).
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_vk_codec_map currently is an array indexed by AVCodecID;
it has AV_CODEC_ID_FIRST_AUDIO (= 65536) entries, but uses
only three of them; only 24B of 1MiB were actually used
This commit fixes this by adding an AVCodecID field to the table
and making it non-sparse.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
