There is no MMX code for loop filters since commit
6a551f1405, so use declare_func
instead of declare_func_emms() to also test that we are not
in MMX mode after return.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
PixblockDSP does not use MMX functions any more since
92b5800277 and FDCTDSP
since d402ec6be9.
BswapDSP never used MMX, so that the emms_c() here
is unnecessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This also enables the compiler to optimize the implicit
checks performed by the PutBit-API away (Clang does so).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The current pbc might be small for an obu frame, so a new pbc is
required then parse this obu frame again. Because
CodedBitstreamAV1Context has already been updated for this obu frame, we
need to restore CodedBitstreamAV1Context, otherwise
CodedBitstreamAV1Context doesn't match this obu frame when parsing obu
frame again, e.g. CodedBitstreamAV1Context.order_hint.
$ ffmpeg -i input.ivf -c:v copy -f null -
[...]
[av1_frame_merge @ 0x558bc3d6f880] ref_order_hint[i] does not match
inferred value: 20, but should be 22.
[av1_frame_merge @ 0x558bc3d6f880] Failed to write unit 1 (type 6).
[av1_frame_merge @ 0x558bc3d6f880] Failed to write packet.
[obu @ 0x558bc3d6e040] av1_frame_merge filter failed to send output
packet
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
It does not require anything that is being set between
the new position where it is called and the old position
where it used to be called; and nothing that it sets
gets overwritten between these two positions.
Doing so allows to remove a check lateron.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It does not require anything that is being set between
the new position where it is called and the old position
where it used to be called; and nothing that it sets
gets overwritten between these two positions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Thanks, Pierre-Anthony. I've updated the patch to remove the unnecessary UL and it's now using mxf_match_uid() to detect the EKLV packet.
Signed-off-by: Richard Ayres <richard.ayres@bydeluxe.com>
Using unsigned and negative linesizes doesn't really work.
Use ptrdiff_t instead. This fixes the fraps-v0 and fraps-v1
FATE tests with negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Use ptrdiff_t instead of unsigned for linesizes.
Fixes the armovie-escape124 FATE test with negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
c93.c used an int for the stride and an unsigned for the current
linenumber. This does not work when using negative linesizes.
So use ptrdiff_t for stride and int for linenumber.
This fixes the cyberia-c93 FATE test when using negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The data in SGI images is stored planar, so exporting
it via planar pixel formats is natural.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
SGI is intra-frame only; the decoder therefore does not
maintain any state between frames, so remove
the private context.
Also rename depth to nb_components.
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The earlier code used "p->data[0] + p->linesize[0] * s->height" with
the latter being unsigned, which gives the wrong value for negative
linesizes. There is also a not so obvious problem with this:
In case of negative linesizes, the last line is the start of
the allocated buffer, so using the line after the last line
would involve undefined pointer arithmetic. So don't do it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes segfaults with negative linesizes; in particular,
this affected the sunraster-(1|8|24)bit-(raw|rle) and
sunraster-8bit_gray-raw FATE tests.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
A lot of the stuff in ASV1Context is actually only used
by decoders or encoders, but not both: Of the seven contexts
in ASV1Context, only the BswapDSPContext is used by both.
So splitting makes sense.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Simply taking the Zbb REV8 instruction into use in a simple loop gives
some significant savings:
bswap_buf_c: 1081.0
bswap_buf_rvb_b: 771.0
But we can also use the 64-bit REV8 as a pseudo-SIMD instruction with
just one additional shift, and one fewer load, effectively doubling the
bandwidth. Consequently, this patch is useful even if the compile-time
target has Zbb enabled for C code:
bswap_buf_c: 1081.0
bswap_buf_rvb_b: 341.0 (this patch)
On the other hand, this approach fails miserably for bswap16_buf as the
ratio of shifts and stores becomes unfavorable compared to naïve C:
bswap16_buf_c: 1542.0
bswap16_buf_rvb_b: 1803.7
Unrolling to process 128 bits (4 samples) at a time actually worsens
performance ever so slightly:
bswap_buf_c: 1081.0
bswap_buf_rvb_b: 408.5
Unfortunately, it is common, and will remain so, that the Bit
manipulations are not enabled at compilation time. This is an official
policy for Debian ports in general (though they do not support RISC-V
officially as of yet) to stick to the minimal target baseline, which
does not include the B extension or even its Zbb subset.
For inline helpers (CPOP, REV8), compiler builtins (CTZ, CLZ) or
even plain C code (MIN, MAX, MINU, MAXU), run-time detection seems
impractical. But at least it can work for the byte-swap DSP functions.
To avoid data dependencies, this does the following unroll, which
requires one extra but probably free addition:
coeff = (b * left_weight) >> decorr_shift;
b += a;
a -= coeff;
b -= coeff;
swap(a, b);
We never guard against a user freeing/stealing the private context;
and returning AVERROR(EIO) is inappropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Move ROUND_MUL* macros to their only users and the Celt
macros to opus_celt.h. Also improve the other headers
a bit while at it.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Simply don't include opus_pvq.h in opus_celt.h: The latter only
uses pointers to CeltPVQ.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
opus.h (which is used by all the Opus code) currently includes
several structures only used by the parser and the decoder;
several elements of OpusContext are even only used by the decoder.
This commit therefore moves the part of OpusContext that is shared
between these two components (and used by ff_opus_parse_extradata())
out into a new structure and moves all the other accompanying
structures and functions to a new header, opus_parse.h; the
functions itself are also moved to a new file, opus_parse.c.
(This also allows to remove several spurious dependencies
of the Opus parser and encoder.)
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: out of array access
Fixes: 51648/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TRUEHD_fuzzer-4644322217164800
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
More than 2 channels seems unsupported, the code seems to just output empty extra channels
Fixes: Timeout
Fixes: 51569/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SPEEX_fuzzer-5511509165342720
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 119760682 - -2084600173 cannot be represented in type 'int'
Fixes: 50993/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-6745781167587328
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise p->linesize[0] * y will be evaluated as an unsigned
which leads to segfaults in case linesize is negative.
This happens in the apng-dispose-previous FATE-test in case
one makes get_buffer return pictures with negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This might happen in avio_write() if size == 0
when the direct codepath is taken. It is undefined behaviour
according to the spec although it happens to work in practice.
Fixes the webm-webvtt-remux FATE-test under UBSan.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
partial_corr is an int16_t and so the av_clipl_int32()
never clips and can be removed. This also avoids
undefined left-shifts of negative numbers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
